Belkin Computers & Internet - Page 5 - Recent Questions, Troubleshooting & Support

If you have never changed the default password, you can find it printed on the label on the bottom of the router. If you have changed the password before, you will need to reset the router back to factory defaults. There is probably a small button on the back of the router labelled "reset" that you will need to hold down for 10 seconds and release. To push this button, you will likely need the tip of a pen or the end of a paperclip bent into a straight line.If you still need more assistance, please post the specific model so we can find a user manual for it online. If this solved your problem, please don't forget to rate this

Did you mean to recover a Linux OS.Routers don,t use kernerls.

There is a physical issue with the connections inside of your keyboard. The C and the D keys are on the same data line and the C is getting triggered when you press the D key.

This model printer has only an USB printer connection and normally connected to a computer or laptop.
To connect this printer wirelessly to all laptops on your wireless network there are a couple of methods.
Connect the printer to a desktop computer and setup the printer as a shared printer. Next connect the desktop computer to your wireless router with a LAN cable and then configure the wireless laptops to connect to the shared printer on the desktop computer. NOTE - This desktop computer and printer must be on at all times for the wireless laptops to print to the printer.
OTHER METHOD
Connect the printer to an USB print server and connect the print server to the wireless router with a LAN cable. The printer drivers needs to be installed on all the wireless laptops and then the printer port needs to be deleted from the USB port and a new IP address printer port installed. This IP address will be the IP address of the print server.

It can be that your iphone doesnt work with 2.5ghz but maybe 5Ghz. Try setting up your router with 5Ghz and see if that will help

Power it up and use an ethernet cable to connect to the router. Then you should be able to login to the router UI to set up your preferences.

Normally, connect pc with router, and modem off. Turn on the desktop and then turn on the modem and router. letting the modem and router assign ip addresses to all connected devices.

(800)-223-5546

Wireless light will lit up only if any wireless computer is connected to Belkin's wireless network.
First, connect to Belkin's wireless network that you can scan.
After you connect, try to go online
It ll work...

You may want to click to wireless network icon on the bottom part on the rght part of your monitor and search for network. Then you may want to chose your network and, if you chosed this option, to type the password for the network.
Let me know if you were successful in solving your problem

1 800 2BELKIN x2263

Oh, sorry I didn't see it in the title before. First, check the dirvers are properly installed for the adapter. Then if you don't have the wep key, connect by cable or other computer connected to your router (better by cable, as you can have restricted access to router setup menu from wi-fi). The WEP will be in WIFI config. section. If you cant log in to your router, try export the config profile out from another wifi connected PC and import it into new device wifi config software (if they support the same profiles). If nothing of this helped, you can still reset the router (find in manual- most often disconnect from power and push reset button for about 10 seconds) and setup WIFI with new WEP key. Don't forget to write the wep down. If WEP is not your problem but connectivity of the adapter to internet or network at all, describe the problem more deeply

If you connect the computer to the router , it works.
That means the wired connection is OK.
Open the set up page of the router check the wireless settings of the router.
I think your network is secured and you are not typing the correct network key.
just open the router set up and check the wireless settings .
Click Here for step by step solution

Try turning off encryption on your router if it is on. Many times the macs can have an issue with encryption.

This depends on if your computer is hard wired or wireless. If it is hard wired you sometimes have to reset the router, pull the plug wait 30 seconds then plug it back in also do this for the computer that is not connecting, this will start the hand shaking process over. If it is wireless you may have to reset the wireless adapter. the easy way to do that is to hover the mouse icon over the wifi icon on the bottom right of your screen now right click on that and select troubleshoot problems, this will reset it. If this fails then on your start on the bottom left normally open that and in the run box type cmd now hover your mouse over the cmd and right click and select run as administrator a black box will open in there type netsh winsock reset and hit enter after doing that you will have to reboot your machine, hope you get back online..

Hello,

The easiest way is to turn on the mac restriction feature and only allow the macs from the machines that you want to have access.

Since I didn't see the model of router listed, you will need to refer to the manual for exact instructions on enabling that feature.

You can get the mac addresses from the machines that you want to have access to the router in xp by click Start > Run > type cmd.exe and press enter. Then type ipconfig /all and look for the physical address of your adapter. It should be in the format of XX-XX-XX-XX-XX-XX. Once you get that information you can allow it in your router.

This will give you basic security on your router.

Thanks