Beko Washing Machines - Recent Questions, Troubleshooting & Support


in most cases unplug from the wall for several minutes, and try again if that fails maybe a fault in the module

Beko Washing... | Answered on Jan 19, 2019


Start by turning the washing machine of with door shut.
Now turn the dial to the position 1 Which is normally the 90c hold the start /pause button down while you press the on/off button to on for a couple of seconds till light flashes
Now turn the dial to the position 6 and hold down a few seconds the next time you enter it should turn on all the lights now you are in self test diagnostic mode:
Every time you Press the on/off button it will change the test function.
1st all the lights will show
2nd will not do anything
3rd This will tell the motor to turn at standard wash speed clockwise with pump emptying.
4th This will tell the motor to turn at standard wash speed anticlockwise with pump emptying.
5th This will tell the motor to spin clockwise with pump emptying.
6th This will activate right hand compartment water valve. Please note machine will keep filling until you stop it.
7th This will activate left hand compartment water valve. Please note machine will keep filling until you stop it.
8th This will activate booth water valves together. Please note machine will keep filling until you stop it.
9th will not do anything
10th this will start fill cycle until water activates the pressure switch at normal fill level (Normally just below the glass on the door) when the Beko washing machine has reached the level it will start clockwise rotation at normal wash action and heat the water. Please note You Have to stop it manually.
11 this will activate the pump only to empty.
Press again and you are back at the start. Turn machine of and leave for a few minutes and the switch back on and you're in normal wash mode.

Beko Washing... | Answered on Jan 12, 2019


Order the service manual directly from Beko.

Beko Washing... | Answered on Jan 08, 2019


Unplug it for 5 minutes

Beko Washing... | Answered on Dec 11, 2018


Probably time to call a professional

Beko Washing... | Answered on Dec 06, 2018


Michele that wooshing sound is usually made by water entering or exiting the main clothes compartment.This is all water movement created by the washers internal pump and initiated by the wash cycle switch on the dashboard of washer.Check for disconnected wires on pump and or wires to the cycle switch.

Beko Washing... | Answered on Nov 25, 2018


could be a motor tacho fault...or the electronic module..this normally controls the whole machine with commands

Beko Washing... | Answered on Nov 21, 2018


MANY mfg's only sell parts thru their dealers , I would check them

Beko Washing... | Answered on Nov 02, 2018


My washing machine time delay switch is flashing and I can't turn the machine on what do I need to do?

Beko Washing... | Answered on Oct 24, 2018


The cycle timer may have stuck at the 39 minute point.

Beko Washing... | Answered on Oct 14, 2018


Hi, Beko error code format is usually preceded by an E and goes from 1 to 18 or 19. E.g.: E1, E2...E18. Please post a picture of the error code display and your model number and one of the readers may be able to help you.

Beko Washing... | Answered on Oct 09, 2018


https://www.repairaid.co.uk/beko-washing-machine-error-codes/

Beko Washing... | Answered on Oct 09, 2018

Not finding what you are looking for?
Beko Logo

697 questions posted

Ask a Question

Usually answered in minutes!

Top Beko Washing Machines Experts

Eric Taylor

Level 3 Expert

560 Answers

ptpumpman

Level 3 Expert

408 Answers

Cindy Wells

Level 3 Expert

5725 Answers

Are you a Beko Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...