Beeman Optics - Page 6 - Recent Questions, Troubleshooting & Support
How many shots till i should clean my gun?
It would be a good idea to clean it every time you use it before you put it away. Unless you are shooting some exotic match that calls for a clean bore every 5 rnds. Depending on where you store your guns, leftover dirt, fouling, unburnt powder in the bore, attract moisture, next time you peek in there, it's full of rust!! Not good. Clean it, it only takes a minute. Don't give it the wd40 squirt, run a patch or two down the bore with solvent and then oil.
My rifle hits the same spot no matter how i adjust it
there should be two adjustment dials on the scope one on top and one on the side might be covered with a plastic plate, depending on the scope the top dial does elevation, and the side dial does left and right adjustments
Very low power and inaccurate. I think I may be
The seals are prone to drying out.. try a few drops of light oil at the point in question. If that doesn't help build the pressure, you'll have to take it in and have it serviced.
Mark the Gunsmith
*Please give feedback on this answer*
Where do I find a owners mamual for a Beeman
My problem was that I was looking for a owners manual for my Beeman sportsman 1000 series,so I ended writting to Beeman.
Thank you for the offer,but I will not need your help,if I do need it ,I know where to ask ,thank you again,Dave.
Cross hairs do not adjust. Tell me what to do please?
All question need FULL 'make model (what it is)'.
You posted to optics, so let's guess is a telescopic rifle sight?
It is impossible to see and movement as the crosshairs move such a tiny amount. Half a millimetre in the sight is 10 feet at the target. The only way to zero in sights is on a fixed bench rest at the range.
If you really think they are faulty, return them to the maker for repair.
3/8/2023 1:07:51 AM •
Optics
•
Answered
on Mar 08, 2023
Not finding what you are looking for?