Beeman Optics - Page 5 - Recent Questions, Troubleshooting & Support

Hi Pervierj,Oh yes there is!Download the manual in pdf here.Hope this helps.Thanks!Please rate this answer.

Please Repost with model number. Do not know what you have to help you with.

Are you sure its a bb gun and not a pellet gun? Usually bb guns have a magnet on the bolt, that keep the bbs from falling out. Pellets don't roll so the won't roll out the barrell.

Need way more info. Make and model number of th gun, and type ie. Co2 or pump.

Go to http://www.network54.com/Forum/79537/.
You can learn a lot there.

Unfortunately air rifles are hard on scopes due to the recoil...Suggest replacing the scope with something more of a brand model , like Bushnell or something like that..

the fault is the triger return spring,,,,,,,get it looked at,,,,,
by a gun smith,,,faulty triger are dangerous,,and killers too?

the best place to find parts for your rifle is to look in air gun mags or the internet,, if you were in the uk i could point you to a shop

Yes they are adjustable, both 1st and 2nd stage and also trigger weight.
The trigger group is easily disassebled and honed with fine emery paper. You really dont need a mirror surface but the factory surface is very far from smooth. There are som sharp corners on the sear and the trigger lever, DO NOT ROUND THEM.
Pay close attention to the three small springs inside, if you get them mixed up the rifle will not lock.
This work will make all the difference in your rifle.
Just work slowly and with caution not to change the angles in the trigger geometry, all you want to do is polish the surface.

Tutorial can be found here http://webpages.charter.net/guru1/documents/RSE%20Airguns%20-%20Beeman%20RS2%20trigger%20guide.pdf

Air rifles are tough to fix, check out this website,,,,,,http://www.airguns.net/faq.php#faq1

Do they come in a bottle with a spout on it? Twist off the spout and pour, if the tip is sealed, you'll have to snip it off, maybe sealed under the cap too. Check it out.