Asrock Computers & Internet - Recent Questions, Troubleshooting & Support

Try disconnecting and then reconnecting keyboard.
If it doesnt solve the problem, you may have tp check with another computer or another computers keyboard on this computer. Tell me after checking.

a 2005 made MOBO , old, 12 years old to you and the coin cell battery is dead and not BIOS lies to you for sure. new battery time.NO OS told at all ,not any clues...w2k, xp,vista, w7/8/10?turn on all sata ports first in biosend.the load all drivers from Asrock off your support pageto match your Unstated OS.the drive must be good. as do cables, cables are rare to fail, hdd is super common to fail.IN BIOS PAGE SATA enable all ports firstIN BIOS disable RAID. or the port can fail easydo not use RAID, page 30 in free manual (non raid)page 31 run SMART monitoring ON.next set VIA SATA Raid Utility , disabled.so bios can not see the sata drive, that is bad drive if all sata ports are enabled in BIOSgee try all sata ports, not just 1.test hdd in 2nd PC or docking station USB >satathis mobo is old and uses stinking VIA chipsetsthat nobody supports, for sure not VIA. and 2 chips double bad that., the mobo has no support at all above XP periodon XP all of these driver need to be installed to XP all VIA ones for sure. https://www.asrock.com/mb/VIA/K8Upgrade-VM800/index.la.asp#Downloadrecap:hdd is bad, fails on 2 PC, for sure SMART test fail.do all sata ports fail , only has 2, and 4 IDE PATA 2+2)id disable all IDE port to help all this. never use IDE drives, ever. (only sata)ok to use IDE CD drives. sure.

no new case told if new. nor if using recycled PC case OEM.the AC97 panels are rare now. but here they all area history search for youhttps://search.brave.com/images?q=buy%20%20a%20Front%20Panel%20Audio%20Header%20ac97#5 page20 in your asrock manual is all you get from them.

firmware DOS(?) what does that mean, DOS?no dvd disk told of endless on earth and most being uselessonly 3 kinds of disk work here.MS instanller disk , no OS told at all (gee DOS OS?)OEM PC disk from say ASROC?or a home made clone of the same or off stinking rotten infected torrents/?????I see by you one clue you are the last man on earth installing 2001windows XP on a PC mobo 2010 and with usless Nforce chipset there. pure junk now, AMD nforce, or VIA or SIS chips.the OS XP is the F6 mode,, and F6 forces on a driver called a XP preboot driver (or vista) and must come from support page asroc..XP is F6 married to a Floppy drive, gee where to get a floppy disk now>? huh, they be gone not, zero here in my town, for a decadethe usb driver here is usless, and is for RAIDturn RAID off in bios step 1.new coin cell battery it is too old.you will need to as asrock where is the XP preboot driver. for sata.the instruction for xp , vista and w7 are not the same. to get those installers to work with Nforce JUNK..best is avoid NFORCE MOBO totally.

Italian to Eng Hi everyone I have a problem with the mobo asrock p4vt8 + when the boot gives me this screen: scan devices please wait ... press <tab> key into user window! serial_ch0 master: no device serial_ch1 master: no device cmos settings wrong press f2 to run setup press f1 to load default values and continue but when I press f1 or f2 the computer freezes, I want to make it recognize the hd ide but I don't know how to do it ! thanks in advance the coin cell battery is dead or the hdd is dead there are 2 cures. 1: new battery and reset bios. 2: test the hDD if bad , it must be replaced and new OS installed.

google translated to ENGLISH you said, (i hope) "After having done all the checks with the router and the cpu connection and having tried other computers the problem is the following: every time I turn on the computer I have to restart to be able to surf the internet, and once restarted I can surf but not before . So the problem must be with the motherboard. I would appreciate a solution, as it is very annoying." AND COMMON ! NO OS TOLD AT ALL AND MATTERS FIRST. XP,VISTA , 7? WHAT? OS IS THERE. upgrading any OS past what Asrock allows gets you dead , LAN AND DEAD SOUND. (and more) answer, 1: tried other computers<<< and what happened on them.? all the same or only 1 PC fails and not told ethernet or wifi connected. so answer are super hard, but i bet Ethernet works other PCs cabled to router. the CPU has no LAN, sorry, the mobo does have LAn CALLED ETHERNET.(wired). and the chip is known, (in the manual) no lan told.(wifi or wired) there is no wifi on this mobo, so must be this, wired below. Realtek PHY RTL8201CL - Speed: 10/100 Ethernet (slow kind) to use this chip on thIS MOB\O BOARD, WE must load the driver first from asrock (using a 2nd PC to fetch it and put it on dead lan PC)_ the drivers are frozen at XP/ VASTA OS. LONG AGO 2006 YEAR. LOAD ALL 6 DRIVERS SEE HERE. (PICK OS FIRST) https://www.asrock.com/mb/nvidia/alivenf6g-vsta/#Download ELSEWHERE YOU GET A VIRUS, I PROMISE, BESIDES BELOW. OR IF LUCKY DIRECT FROM CHIP MAKER HERE THE 81-nnnn driver is no good for 81. so finding it here is not easy. https://www.realtek.com/en/component/zoo/category/network-interface-controllers-10-100m-fast-ethernet-pci-software

HOW TO OVER cLOCK IS A COMPLEX TOPIC FOR SURE RELIC PC 2007 PC, NOW IN YOUR HANDS AT 2017 RULES. after new coin cell battery for sure.

• THE MAKER ALLOWS IT ASROCK, AND ITS BIOS.
• The CPU allows, it beyond minor useless tweaks.
• CPU choices are dictated by both above and model mobo.
• CPU chipset limits, and mobo bandwidth limits. 945/ICH7 BOTH.
• AND PURE LUCK AND even PC and room temperatures.
• read he manual yet ,free at asrock.com????
• and damage , OC can in fact blow up parts to H3LL.

excerpts: LGA 775 for Intel® Dual Core Core TM 2 Extreme / Core TM 2 Duo / Pentium ® Dual Core / Celeron ® , supporting Dual Core Wolfdale processors - Compatible with all FSB1333/1066/800/533MHz CPUs except Quad Core (see CAUTION 1 ) - Supports Hyper-Threading Technology (see CAUTION 2 ) - Supports Untied Overclocking Technology (see CAUTION 3 ) - Supports EM64T CPU and WARNING "Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying OEM intel Untied Overclocking Technology, or using the third- party overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by your overclocking.!" c1 FSB1333-CPU will operate in overclocking mode. Under this situation, PCIE frequency will also be overclocked to 115MHz. that means the GPU card x16 crashes too. see??????? c3 this motherboard supports Untied Overclocking Technology. Please read "Untied Overclocking Technology" on page 20 for details. amazing just reading the manual you learned all that, ! read all of page 6,7 and 20, for OC first and have fun doing BSOD's endless, and worse smoke. pg:20 "2.11 Untied Overclocking Technology This motherboard supports Untied Overclocking Technology, which means during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. (this means PCI bus is not overclocked in EnglisH) "Before you enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode(best) so that FSB can operate under a more stable overclocking environment. Please refer to the warning on page 6 for the possible overclocking risk before you apply Untied Overclocking Technology." and more, no 2 CPU on earth overclock the same way or amount. and some not at all (means significant to apps running) and doing so can damage any chip here overlocked, overhearting transistors on them or related sub components./ mostly this is kids that play with a PC or want to game faster.. why not just buy I7 4xzy, gen 4 PC:? used for $100 end this 2007 core2 stuff.

HI FIND LINK FOR N1996 DRIVER http://www.msi.com/product/mb/PM8M-V.html#/?div=Driver&os=All

2002 relic, and you think a 15year old coin is good?coin cell dead.below 2.9vdc is NO GOODnext up is learning to have kit of bootable medialike USB linux demo mediaand force it to boot to USBeven remove all cables DVD and HDD all.run with a minimum PCand not use 2010 and older monitors with dead CCFL back lamps.turn on PC first. count to 10 and turn on monitor 2ndif monitor brain shows NOSIGNAL your VGA PC port is dead or cable bad but monitor is not bad with that error on the screen, or monitor is set to wrong input port on the OSD of monitor.this MOBO has no video port at allso you must add a video card, AGP or PCI.AGP is huge pain here, as 1/2 the cards made do not work here.but does allowsupports 3.3v / 1.5v, 4X / 2X / 1X AGP cardsin bios see this.Primary Graphics Adapter: Select PCI or AGP as the primary graphics adapter.PGA choice. best is to do this. tricky yes seen it vast times back in Y2K erause PCI video card. and be happyor if must be AGP (your call)use PCI first.and then at PGA choice above flip it to AGP from PCIsave bios , and exitAC power cable pulledpull PCI cArdinsert AGP cardAC back power on see AGP caRD WORK. NOW.SEEN THIS VAST TIMES THEN AND ALSO 1/2 THE CARD MADE JUST DOT WORK agp. EVEN BIOS REJECTED.

real asrock mobo told ,just the intel chipset code H110the bios controls that in bios disable iGPU. no cpu told either as some have no igpu at all.like xeons, and some mobo can run both i3+ and zeons.see this search at asrocksee how your post has no real clues?https://www.asrock.com/support/index.asp?Model=h11029 mobo made based on only intel chipet.

double posted you?of 29mobo not one told.https://www.asrock.com/support/index.asp?Model=h110the bios page,labeled, igpu (disable /enable ) is there.some mobo allow zeon here with zero igpu.but not yoursthey make h110 ,mobo just for useless now, bitcoin mining.watch the netflix movie how the blocked mining,then save moneyalso learn what ROI is?

there are 3 versions of that card, G1, g2 and G3, hardware generation. (G models ,not GV) Guess G3 version: xp 32 bit or 64b it is max OS for eternity, the virus magnet. I read G3 manual for you.. easy. RTM did you read, ddr caution 1 to 5 first. on DDR? and CPU, both. both matters. my guess is you failed to read PAGE, fully or not at all. read it. not told using, AGP video card, listed on QVL? not told is AGP cocking tied or untied in bios page. same if you overclock the memory the AGP card fails, if tied. so rule #1 do not do that. are you mucking with overclock settings, why not just set clock to DDR spec speed max and CPU speed max which ever is less. Supports DDR400/333/266, 2 sticks max. Quote caution 1 "FSB1066-CPU is supported only when you install AGP VGA card into AGP slot. Besides, if you use a FSB1066-CPU on this motherboard, please adopt a DDR400 CL2.5 memory module." 2GB max" BIOS page, turn on memory timing by SPD (plug and play chip on sticks) The bios will not know what CPU max is and then read he SPD chip and if equal it runs at that speed, or IF ether is lower spec. the speed is at the lower, do not overclock chips as that causes overheating and hard failures. but is you cash lost not mine and down time. and even BSODs endless. (kids being kids) the manuals on old mobo are clear on this and how. no ram models told (sku models) nor how many or size ddr and if a matched pair is it MUST BE, (intel told you to !) no CpU told, full model # of CPU not told. is this CPU 1066? rated , NOT TOLD. so any easy answers wow hard. learn to post using notepad MYbuild.txt FILE. make a file and type all details of the this custom build. then post that first so we can end guessing all that. and get exact answers. if GPU used, tell maker and model about 1/2 of all made fail. so... cpu exact model not old (the lid of CPU all words there MATTER) ddr size pair models.# (labels have P/n#) set all ddr to auto. and do not overclock use tied mode. (this scales fsb to gpu speed so can not fail) Untied is overclocking mode, avoid that. (is dual clock settings) learn to do this the safe way then later overclock (why) and break it later and then at that moment you know you did that, say next week? and damage does happen.. doing that, costly too,., enable the SPD, this line means SPD ( is the sticks Plug and Play WHO AM I CHIP) it in facts contains the full spec of the DDR inside SPD) this act (SPD enabled) sets the CPU to the speed max the paired DDR, to max allowed allowed (which ever is the lesser wins) nothing works better and for longer. even a hot PC,

Asrock ConRoe945G-DVI 2006 RELIC JUNK MOBO> OMG 945 chip set junk. whooooo relic max. only ascrock drivers work from there web site. matching 2 things, your OS and your exact model PC. our relic manual states (came new with XP new) Microsoft® Windows® 2000/XP/XP 64-bit/VistaTM compliant same place this. "Microsoft® Windows® VistaTM driver is not ready yet. We will update it to our website in the future. Please visit our website for Microsoft® Windows® VistaTM driver and related information" sound problems well only their drivers work , sound is their custom design and complex so here it is , from them. the vista and XP drivers are hear and 64bit too. https://www.asrock.com/mb/Intel/ConRoe945G-DVI/#Download never google and get infected drivers learn to go to asrock web site only or get infected YOU WILL xp is virus magnet and is crazy to use, vista worse. last released in 2006 Realtek high definition audio driver ver:R1.53

all fans died, all 3, PSU, CPU and GPU? 2009 FAILED PLAYING a GAME that means 2 things, or more i will do them all first off do not hot swap any GPU Card AC cord to wall or boom blow up cards or mobo. (hot swap NOTHING inside a PC) yes happens to 10,000's world wide gaming.!!! not one video card told just the game. how sad is that. it came new with VISTA then 2009 no OS told by you no hints. causes all: seen them all I have.fixed them all (if possible) 1: GPU card with AUX 12vdc jacks 1 to3 not connected all if seen on card they are NEVER optional. 2: PSU overloaded by 3: wrong GPU driver loaded and remove old driver before card is replaced, then shut down and pull AC cord for 15 minutes then load me gpi card driver next, nvidia or AMD/ATI. as the case may be;. 4: PSU BAD gee it ran for 9 years, amazing it did. caps bad there 5: MOBO bad caps left over from 2008? or older. Cap Plague. 6: any of 20-things in a PC shorts, bingo PSU shuts off under 1second flat. 7: PC, PSU or CPU or GPU card overheats it shuts down, for sure near 90c, 50c is goal never allow near 90c, ever, case fans help. we fix bad PC so seen it and we have way faster GAMING PC make right DIY) did I get them all , seems yes. no?

well almost all chips in the PC will be dead using no driver or the wrong driver. there is no XP support now. (PnP *****) after 2014 And RAM is one exception BIOS likes it or does not. video card or chip. NIC , net cards wifi. ,ethernet,, 3G cards? sound (aka audio) north bridge south bridge, sound mixer chips too, and matched to main sound chip. oop only asrock works here. and more depends on all versions and features of he mobo. some PCs can use more DDR memory choices and CPU if bios is upgrade now. mobo with VIA ,SIS AND N-FORCE (AMD) ARE DEAD NOW, ZERO SUPPORT AT ALL BEYOND XP, OR VISTA LAST. AMD.COM READ. IF YOU GOOGLE SEARCH FOR DRIVER THAT WERE NEVER MADE EVER. YOU WILL GET A NASTY VIRUS. asrock.com is the only safe place now, MS ended support.

Check Ram and fun if not properly installed

reinstalling your os has nothing to do with bios, you are getting this message long before any hard disks are involved in fact the bios doesnt even have the interrupts running for the USB devices at this point, you'll notice this if you have a USB keyboard. The only possible solution is to flash or replace your BIOS chip - this is a LAST RESORT option. I dont recommend it if the system works other than the LAN. Your best solution is to install a network card in a free PCI slot, they are pretty cheap if you know where to look, heck even goodwill carries them in their 1$ computer junk bin thats where i bought a few of my 100baset cards (of course at your own risk) hope it helps

First of all, check if there are any inflated capacitors, if there is even one- ditch MBO, other capacitors will soon follow. If no inflated capacitors proceed with these diagnostic steps: 1/ disconnect all peripherials (DVD, HDD, card reader...), leave only MBO, PSU and RAM (and CPU of course); if nothing happens 2/remove CMOS battery (CR2032) for 20-30 sec with power cord disconected from computer, that will reset BIOS; 3/ take out RAM sticks, then, if you have more than one stick, try with each stick separately (it might be faulty RAM); 4/power on MBO without any RAM-if speaker is present it should give BEEP signals; 5/ try with different PSU, many power supplies are faulty even when they do give power to MBO. If nothing of above does not help than you have faulty MBO, because CPUs are so rare to fail that in my 10 years of experience in PC service I had 3-4 fried CPU-s, and even that was because costumer tried to clean PC, removed CPU cooler and than incorrectly placed it back or didn't put thermal paste afterwards.

THE MANUAL IS HERE, STILL3.2GB maxG31 has no support at all now, no modern OS runs here.the coin cell 15 years old is dead.test it with old DDR not new, 2021 DRAM chips are not allowed on g31 relics.find a 1 GB old stick of ram test it with 1 old stick of ram first spend $1 DDR2 desktop old.15 years old bios can not magically know future in year 2021 and understand G.MOORE law, on density.no way Jos'e , not happening see that DDR stick with only 1 side or very few DRAM chips there?, FAIL.who messes with g31 now, 2021, i guess only youbut sure it can run using old DDR sure.RTM at ASROCK.comG31M-S v1 or v2?https://www.asrock.com/support/index.asp?Model=G31M-S

3 post all the same mobo and all 3 same reasons. and all 3 same answers. zero no I added one, coin cell is dead at 7 years, you are 2004 to 2018 late to the party. 14 year old battery is 2 times spec life. for sure.