Aqua Brass Home - Recent Questions, Troubleshooting & Support

take the details along to a plumber supply shop ( not a hardware shop or mart) and there will be some one there that will be able to advise on parts , problems or replacement equipment

The rollers for most shower doors are a stamdard size and are available at most hardware stores. The Bigbox stores might even carry rollers for you specific make and model.

followt this steps and fix it. God bless you

1. Turn off the water supply and open the faucet handle to relieve water pressure.
2. Carefully pry off the trim cap with a small screwdriver or putty knife.
3. Remove the locknut with an adjustable wrench, then lift the spindle out of the faucet.
4. As needed, remove and replace the O-ring. Before reinstalling, coat the stem lightly with plumber's grease.
5. As needed, remove the retaining screw and pry out the washer. Install an exact-replacement washer and tighten it.
6. As needed, inspect the seat and replace if damaged.
7. Install the valve and tighten, then reinstall the handle and test.

lock tight red or stronger will bond it together . but forget remove it after

Try using jb weld or another type of epoxy that is water proof. 100% silicone caulk may also be worth a try.