Aprilaire Humidifiers - Popular Questions, Answers, Tips & Manuals
I have a aprilaire thermostat 8346 is is flashing 11? it does not seem to be working?
With many Aprilaire thermostats, the flashing 11 indicates that there is a broken wire between the thermostat and the HVAC system. You should turn off the power to the HVAC system. Then take the thermostat off the faceplate. Check for any damaged wires. If there is a break near the thermostat, take the undamaged section of wire and secure it in the correct spot. See
https://www.manualslib.com/manual/8847/Aprilaire-8346.html for the installation directions.
You could also try installing a new thermostat. Then make sure that all of the wires are properly connected to the terminals. You may need to check the wires at the HVAC control board or in your wall. You may want a professional to check the system for either of these steps.
I hope this helps.
Cindy Wells
8/26/2018 4:59:12 PM •
Aprilaire...
•
1,103 views • 0 helpful votes
Keep blowing 24V transformers
Somewhere in the mess you have described there is a short that is compelling the transformer to put out more current than what it is designed for. It gets hot, really overheats, insulation melts, and the wires melt. Ergo blown transformer.Problem is with whatever that unit is plugged into/powering..
I have an aprilaire model 6303 control panel, and the B and G terminal lights are on, on the equipment output and the fan runs continously. Is the board bad or what please help
ftp://ftp.
aprilaire.com/...
Control/5050_ZCC_productguide.pdf
AprilaireAprilaire Model 6303 Control Panel ... with the Model 6504 Intelligent Zoned Comfort system, we have the right control for your ... A control panel coordinates the operation of the equipment with the ..... Proper control of the fan (G-terminal) for either electric.... Auxiliary output relays available to control humidifiers, electronic.
ftp://ftp.
aprilaire.com/Fulfillment/Inbox.../6404_install_guide.p...
AprilaireModel 6404. Zoned Comfort ... Do not mount the control panel on any part of the heating/cooling equipment or ... allowing for control of a humidifier. b. HUM LEDlights when the relay is closed. .... on the fan (G output terminal) with a heat call (W1output ..... Run wire between the HVAC equipment and the control panel. 3.Missing: 6303
1/20/2016 11:57:34 PM •
Aprilaire...
•
656 views • 0 helpful votes
I have an Aprilaire 700 unit it vibrates when the water solenoid turns on how do I fix it
You gotta remember that the 700 also has a fan that blows air through the water filter/grate. The fan could have a warped blade and thus vibrates when rotating. Although there could be nothing wrong with this unit at all as it is not unusual for any solenoid to vibrate when it's engaged. Could could replace it if you'd like. EBay is your best source. But your posture should really be 'if it ain't broke, don't fix it.
1/13/2015 5:30:01 PM •
Aprilaire...
•
368 views • 0 helpful votes
Not finding what you are looking for?