I need to know how to change modes without controller when I'm using a dvd
Without a remote controller, you may have limited options to change modes on your Apex digital TV. However, you may be able to change the mode by using the buttons on the TV itself.
Here are some general steps you can try:
- Turn on your TV and make sure your DVD player is connected to it.
- Look for the "Menu" button on the TV and press it.
- Navigate through the menu options using the arrow buttons on the TV until you find "Input" or "Source."
- Press the "Enter" button to select the input/source option.
- Use the arrow buttons to select the input/source that corresponds to your DVD player.
- Press the "Enter" button to confirm the selection.
- Press the "Menu" button to exit the menu.
Note that the specific steps may vary depending on the model of your Apex TV. You may also consult the user manual for your TV for more information on changing modes without a remote controller.
Need remote code for Apex AD-1201 DVD player
I don't have the original control remote for Apex Ad-1201 DVD player. I would like to use my Universal Remotes: Radio-shack USA "flag" 4-IN-ONE Remote and / or RCA 312W three component remote. I got the codes from the manuals but my DVD player doesn't work or turn off (only ejecting; open and close) with pause button. Could I get a possible code (s) for these Universal Remotes?
APEX DT250A digital box died
The Problem more often than not is with one or two of the electrolytic capacitors on the power board. They can be bought at Radio Shack for about $1.50 or less. You can tell if the Cap is blown by looking at the top.. it should be flat and have a x stamped in it.. if the top is cracked or "domed" the cap is bad. I just fixed one today for an employee. If you're not comfortable doing board level repairs, I suggest finding a friend. The repair took me a total of about 15 min. The Bad Cap was a 470uf 25v, but radio shack had a 35v one.. works just fine.
I got a new Apex LD 4088 LCD TV and the remote is
When I bought this at Target on black Friday, I did not realize the remote was missing. I had a spare universal laying around. Went online for codes and found nothing but codes that didn't work. Bought a low-end one at Target (who refused to give me one after the TV's sold out, said all I could get was a refund but I got a GREAT price on it and didn't want to spend another 150 to replace it.) Low-end remote did not work, returned it and bought a 70 dollar remote and that didn't work either. Got fed up and called Apex, who jerked me around twice before finally telling me there is a special number if you buy it at Target. Called them and they said fax the receipt and serial number and they would mail me a new one. Did this TWICE and never got a remote, called and demanded a supervisor and explained the situation, he ask my name and info and within 5 minutes I had a conformation email with a tracking number. The aim sucks, but it's not the TV, it's the signal on the remote being weak. The supervisor told me there is only 1 universal remote they know of that works with the TV since it is so new. His name is Marcus Chan and his email is
[email protected]
Hope this helps!!!
Remote won't work
I would try 'waking up' the remote-Take the batteries out,press each button once then put the batteries back in.See if that works.
Not finding what you are looking for?