AMP Car Audio & Video - Page 3 - Recent Questions, Troubleshooting & Support

0helpful
1answer

Cen tech a JNC950 2000 Peak Amp 12 wont take a charge

Amp 12 is not sufficient for the JNC950 you should try another one.
6/2/2020 5:19:05 AM • AMP Car Audio &... • Answered on Jun 02, 2020
0helpful
2answers

When i turn the radio on normally i would hear like a click sound like the amp kicked on.but lately the sound coming out of speakers is distorted and when i hit the bass button its like the bass not as deep,but after its been on awhile the bass and quality of speakers are back .any idea what's causing that?

I am not an expert so I can't help much. When switching on the speaker will generally click or thump as the capacitors charge with power. That the click is no more could indicate anything from a power supply fault to tired capacitors. This could equally apply to the distorted sound though equally the trouble could be the bias adjustment of the audio output stages. The trouble with dc coupled amplifiers is the bias is set by components up to several stages earlier than the output stage(s). Age could have altered the semiconductor characteristics making the existing bias setting useless but heat soak might be restoring those characteristics - just a guess. I suggest you obtain a service manual and a can of freeze spray...
2/28/2020 3:42:05 AM • AMP Car Audio &... • Answered on Feb 28, 2020
0helpful
1answer

Wiring instructions for a kinter ma-150 amp

https://www.youtube.com/watch?v=Djhkm_HYUG8 https://www.youtube.com/watch?v=h3rlMPlMvxo
2/3/2020 5:56:25 PM • AMP Car Audio &... • Answered on Feb 03, 2020
0helpful
1answer

Is 41dxa1000.1 amp good for single 12"kicker comp dvc in 3cub feet ported

you have to first know how low the amp can take the load 1ohm or 2ohm stable
11/5/2019 2:24:20 AM • AMP Car Audio &... • Answered on Nov 05, 2019
0helpful
2answers

What are some reasons that will trigger your car radio to say amp error or would someone have had to messed with it in some way?

Everything depends on the car stereo and amp setup that you have. That info is very important. Um without that it's just a shot in the dark. Possible stereo settings for amp were changed, amp failure, amp wiring fault or the good old it just doesn't feel like working.
11/2/2019 5:53:42 PM • AMP Car Audio &... • Answered on Nov 02, 2019
0helpful
1answer

My audiopipe amp comes on red flashes blue a couple times pops through the subs the works fine

works fine? well nothing to fix then
10/31/2019 11:53:13 PM • AMP Car Audio &... • Answered on Oct 31, 2019
0helpful
1answer

My line 6 IV 30 watt amp comes on but clicks on and off and will not remain on continuesly

I'm assuming it's the Spider IV 30 Watt amp from Line 6. Okay so first how old is it? (the older the more dust bunny probability and possible damage/worn out) How abused is it? (increases the likelihood of damage) Is it dirty? (dust bunnies on vented equipment overheats equipment and excessive build up can cause shorts in circuitry, water damage, aka the obvious. If applicable this is prob most likely sealed unit. Does it need to be opened up and possible blown out with duster? Okay so I checked the amp troubleshooting from there site https://line6.com/support/page/articles/_/general-faq/amplifier-troubleshooting-r439 Also for your particular problem it says check the power cables and make sure they are plugged in. Also change to a known good outlet. (lol these things are almost never the culprit I mean everyone checks those things and they are engineered in ways that make it highly unlikely they will fail) . Your unit has a year warranty I am assuming it's up. Um there are others with your amp that are having issues and shy of a factory reset https://line6.com/support/topic/3178-how-to-re-set-spider-iv-30-presets/ looks like it's gonna need service if all of that stuff don't work. So Here are those links. https://line6.com/supportarchivenew/thread/62002/ https://line6.com/support/topic/35021-spider-iv-30-power-issue/
10/31/2019 11:29:34 PM • AMP Car Audio &... • Answered on Oct 31, 2019
0helpful
1answer

What sub will my fosgate p2002 amp sound the best with

Sorry, picking a sub-woofer and cabinet is a very complicated and a subjective matter. To simplify things, I will break things down into two categories, each with trade offs,which can be discussed later if necessary. Let's say that there are two expectations from a sub-woofer. Some folks want sound quality (SQ) and others want Maximum Thump (MT), not SQ. And then there is the car you are putting it onto. With so many choices in sub-woofers, cabinet configurations & cars, a question like yours is very difficult to answer.SQ, will sound best to someone that likes and wants sound quality, MT, you will feel more that hear, which will not appeal the SQ lovers. So, with that said, what are you after? Some SQ lovers are into the music they are listening to, Most MT lovers are into shaking their car, everyone inside it and all those in the not too distant vicinity. So, you got to pick a side more or less. Good luck!
10/20/2019 4:38:45 PM • AMP Car Audio &... • Answered on Oct 20, 2019
0helpful
2answers

I recently bought a new 1200w amp and sub. But when the sub came it said its peak RMS is 600w, would I still be able to use the amp safely?

Yes...just turn down amp level then crank radio as loud as you will listen to it. Then slowly raise gain back on amp until sub is laboring a bit then turn it back down a bit.
10/10/2019 2:55:45 AM • AMP Car Audio &... • Answered on Oct 10, 2019
0helpful
1answer

Amp has green and red light when I connected it

Short somewhere...unplug speaker wires then power up to see if red light goes away.
8/27/2019 5:21:26 PM • AMP Car Audio &... • Answered on Aug 27, 2019
0helpful
2answers

Why does my Kustom KBA 100 Bass Amp keep blowing fuses

sounds like you have bad power or theres something shorted inside.
7/24/2019 9:26:58 AM • AMP Car Audio &... • Answered on Jul 24, 2019
0helpful
1answer

Xtc frozen edition amp f5,flickers power light on high volume and then goes to protect

How good is your electrical in vehicle? It sounds like your not getting enough power to it. Does it play fine at lower volume
7/24/2019 9:02:51 AM • AMP Car Audio &... • Answered on Jul 24, 2019
0helpful
1answer

How do you run this amp bridged

Hi Tracy, indicate brand, model and type of equipment you are commenting on, in order to find the best possible solution I wait your answer Greetings Franco Dosil Hola Tracy, indica marca, modelo y tipo de equipo del que estas comentando, para poder encontrar la mejor soluci?n posible Espero tu respuesta Saludos Franco Dosil
7/13/2019 6:33:43 PM • AMP Car Audio &... • Answered on Jul 13, 2019
0helpful
1answer

Alphasonik amp model a2075 wiring diagram

4 channel or mono
7/11/2019 3:28:20 AM • AMP Car Audio &... • Answered on Jul 11, 2019
0helpful
1answer

Trying to Hook up subs and amp to my stock stereo have re checked everything and had a friend check to just in case but everything is good and working order

check you remote wire to test unplug your subs and turn on system if protection mood come one your audio output may have problem''if noting happen connect back your your subs if the protection comes back; you sub wiring have to be check or they are bad'
7/11/2019 3:18:31 AM • AMP Car Audio &... • Answered on Jul 11, 2019
Not finding what you are looking for?
AMP Logo

-203 questions posted

Ask a Question

Usually answered in minutes!

Top AMP Car Audio & Video Experts

littlewheel

Level 2 Expert

122 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Alexander

Level 2 Expert

171 Answers

Are you an AMP Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...