Amana Washing Machines - Recent Questions, Troubleshooting & Support


LOCATE SWITCH UNDER LID AND SEE IF MAGNETS HAVE DISLOCATED IF NOT GO BUY ANEW SWITCH AND REPLACE IT

Amana Washing... | Answered on Apr 13, 2019


Check and see if there is a cup in the top of the agitator. Some machines have you put it there, turning back and forth during wash doesn't bother it, but the spin to empty the wash water causes the softener to go out through slots in the top of the cup and be held in the agitator. when it stops the softener drains into the tub, ready for the rinse cycle.

Amana Washing... | Answered on Apr 02, 2019


SADLY PHYSICAL HELP IS NOT SOMETHING WE CAN DO .DRAINING WOULD BE SOMETHING TO DO WITH THE WATER PUMP THO NOT THE BELT

Amana Washing... | Answered on Mar 31, 2019


https://www.partsimple.com/whirlpool-35001269-wp35001269-laundry-dryer-display-control-board.html

Try this link, maybe this is what your looking for

Amana Washing... | Answered on Mar 02, 2019


MIGHT NEED MOTOR OR A NEW BELT WITHOUT SEEING IT CAN NOT GUESS SORRY

Amana Washing... | Answered on Mar 02, 2019


Hello there and welcome to fixya
From what you're describing it sounds like the drain pump is blocked. The nd error code indicates "no drain". If the unit can't drain it won't spin. You're going to have to slide the washer out far enough to remove the rear panel; be careful not to damage the floor. Once you get the rear panel off you will see the pump. Be sure to have plenty of towels & a small container to catch water. I am sending you instructions from the service manual to remove and replace the pump. Another possibility is the drain line is blocked or something is stuck in the tub to pump hose.

Amana Washing... | Answered on Feb 28, 2019


What can I do if my machine doesn't work properly

Amana Washing... | Answered on Feb 12, 2019


LO or FL error is displayed if no water is entering the washer. Check to see if water valves are turned on and check in line filter screens at inlet to hoses. " https://www.6ya.com/callphilipforhelp

Amana Washing... | Answered on Feb 08, 2019


Once the bolt is removed, it should be able to just pull up. It may be tough but grab it from the base and pull up with some force. Carefull not to hit your face once you free it up.

Amana Washing... | Answered on Feb 07, 2019


check your wash program selection check tap on at cupboard

Amana Washing... | Answered on Jan 17, 2019


I bought mine from circuit city in 1994 or 1995

Amana Washing... | Answered on Jan 06, 2019


Find what the error code relates to and fix it. Then the code will go away when you reconnect to power.

https://www.google.com/search?q=clear+error+codes+from+amana+washer

Amana Washing... | Answered on Jan 01, 2019


Does the lid lock? Also Could be the motor. Also could be the actuator that shifts transmission from agitate to spin. Also could be belt issue. Or maybe something wedged between inner and outer tubs. Call a professional unless you’re comfortable with checking all this out.

Amana Washing... | Answered on Jan 01, 2019

Not finding what you are looking for?
Amana Logo

1,946 questions posted

Ask a Question

Usually answered in minutes!

Top Amana Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

Mike

Level 3 Expert

4357 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

Are you an Amana Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...