Amana Popular Questions, Answers, Tips & Manuals

Wpw10119665 in black

check your wash program selection check tap on at cupboard

see pics and check for bad bearings and or bad motor switch, loose belt or belt not conected to motor tensioner

try re sitting the feet that normally works

Does the lid lock? Also Could be the motor. Also could be the actuator that shifts transmission from agitate to spin. Also could be belt issue. Or maybe something wedged between inner and outer tubs. Call a professional unless you’re comfortable with checking all this out.

Clean the filter and try it again

If you are doing diagnostics correctly and start button is unresponsive, control board is most likely the problem

LO or FL error is displayed if no water is entering the washer. Check to see if water valves are turned on and check in line filter screens at inlet to hoses. " https://www.6ya.com/callphilipforhelp

Air duct inside dryer is clogged with lint. Dryer has to be disassembled

http://www.fixya.com/support/t1368757-amana_dishwasher_door_will_not_open

Try disconnecting the power to see if it will reset. If that does not fix it, it will probably need a main board, but more testing needs to be done to know for sure.

Your Amana Radarange is overdue for retirement. Best to not even try.

Old model refrigerator have their defrost timer located at the back right upper corner or the left lower corner with a hole slot for a screw driver. New models have it inside the refrigerator near the thermostat control. It also has a hole slot for a screw driver.

Assuming unit has cooled down, unplug for 5 minutes and then plug back in. If code still flashes and door doesn’t unlock, there’s a problem with latch associated parts, the control board, or wiring between the 2.

Most likely defective water valve or tubing between pressure switch and tub is obstructed or has come off.

sounds like a stuck blower relay/sequencer

Not all stoves have thermal fuses.

try to bring a technician to check or fixe it there might be wrong inside the components like capacitor diod or even the magnetron

What is model #?

Bad main control board.