Amana Logo

Amana Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 1K Products
  • 75K Answers
  • 2M Views

go buy a new one

Amana... | 35 views | 0 helpful votes


MIGHT NEED MOTOR OR A NEW BELT WITHOUT SEEING IT CAN NOT GUESS SORRY

Amana Washing... | 28 views | 0 helpful votes


You mean ALE643RBW... drew blanks when I first looked and gave up. So... there's no moister sensor for this model. It runs the cycle by the start point of the timer. Its labled "more" dry or "less" dry in some fashion which merely changes the length of the cycle. Simple and dependable but doesn't meet todays "green" requirements.
Most likely it is the timer which lists at ~$170US from Sears. Your dryer has gotta have some years on it so not sure what else it may need in the near future. If you can do repairs yourself, $80 refurb timer on Ebay Otherwise to pay labor and markup... better off with new.

Amana Dryers | 32 views | 0 helpful votes


Try disconnecting the power to see if it will reset. If that does not fix it, it will probably need a main board, but more testing needs to be done to know for sure.

Amana Kitchen... | 51 views | 0 helpful votes


How are you determining that one section.is cold and one warm? If this is in fact the case you have a blockage in the coil or a compressor that is down provided this is a multi compressor unit.

Amana Heating &... | 39 views | 0 helpful votes


Error code f6 is an incorrect voltage code. The first thing to do is go to the breaker box and shut the power off to the oven. In some cases there maybe more than 1 breaker controlling the oven, make sure all the power is removed for 5 minutes. After waiting the 5 minutes test the oven if it works all is good, if not you need to gain access to the main board and start checking powers in and out. A lot of the time on a good visual inspection of the wiring and main board you will find the problem due to a melted or burnt spot. I hope this helps.

Amana Ovens | 33 views | 0 helpful votes


F1 - Control Board Failure - Replace control board (ERC). F2 - Oven Temperature Too Hot - Replace oven temperature sensor. F3 / F4 - Shorted or Open OvenTemperature Sensor - Replace oven temperature sensor. F5 / F6 / F8 - Control Board Failure - Replace control board.

Amana Heating &... | 49 views | 0 helpful votes


HOW WOULD WE GUESS . TRY IT AND FIND OUT FOR YOURSELF . THAT IS HOW WE ALL LEARN THINGS

Amana Microwave... | 24 views | 0 helpful votes


Motor could be burning out and drawing too much power. If it's old not worth repairing.

Amana... | 75 views | 2 helpful votes


There should a on-off rocker switch on the icemaker. Turn it off.

Amana... | 33 views | 0 helpful votes


Assuming unit has cooled down, unplug for 5 minutes and then plug back in. If code still flashes and door doesn’t unlock, there’s a problem with latch associated parts, the control board, or wiring between the 2.

Amana Kitchen... | 35 views | 0 helpful votes


https://www.partsimple.com/whirlpool-35001269-wp35001269-laundry-dryer-display-control-board.html

Try this link, maybe this is what your looking for

Amana Washing... | 20 views | 0 helpful votes


Always check the breakers in your electrical breaker box in house first. I say this because it takes 2 for dryers one for coils and lights the other for motor and thermostats. Next check door switch by listening for contact click sound when you push the door closed if you hear it switch is good and most likely motor is bad.

Amana Dryers | 40 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Amana Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Cindy Wells

Level 3 Expert

5792 Answers

Are you an Amana Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...