Amana Heating & Cooling - Page 8 - Recent Questions, Troubleshooting & Support

I've replaced many Amanda control boards. They have micro relays attached to the board. These relays are about a half inch by 1 inch in size, and control line voltage to the compressor and blower motor, and give up quite often. Its probably the board if its a digital controlled board. If it has manual, turn to select, type knob, it will be in that fan section knob. Hope this helps!

it should be above the burner on the outside of the heat exchanger square is shape

Likely have a bad capacitor. Amps×2650÷volts on the capacitor will give you the microfarads If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

I dont know about this model but in general electric heat wont have a reset button the heat is controled by a sequencer and each elememt has a safty limit switch incase the sequencer sticks in the on mode here is a link to where you can get more info on this model http://www.fixya.com/support/p51773-amana_ptc153b35aj_air_conditioner

• Designed specifically for iPad Pro 12.9 inches iOS 11 Tablet. Easy access to all features and controls.
• Ultra slim and lightweight hard back design adds minimal bulk while protecting your precious device.
• Premium PU leather exterior and microfiber interior.
• No bezels around the screen allowing for unobstructed gesture swipes.
• Easy clip-on application. Easy clip-on application. Automatically wakes or puts your device to sleep when the lid is opened and closed.

AmanStino Ultra Slim Lightweight Smart shell Stand Cover with Auto Wake...

Use a volt meter and measure all the wires voltage, the one you need should be able to be located that way.

do a google search for appliance parts. then pick a few results and try them

Is there a reset on the cord?

Check reversing valve and solenoid.