I have a feature Comforts Oil filled heater It
Yes it does have a reset and fortunately a simple fix
How do I reset my comforts zone heater?
To reset the heater, simply
turn power off and unplug the heater for 10 minutes until it cools down and then you may plug the heater in and restart.
..
I have a Remington 100 Heater. Was running fine
Similar heaters that use diesel have to routinely cope with the dye added to untaxed fuel, ditto similar heaters that use both fuels. Unless there was an excess of dye in the fuel you used the problem was probably a coincidence.
Dirt can be a big problem due to corrosion forming in the fuel tank caused by a relatively large percentage of moisture naturally in the fuel and the formation of condensation. Fuel is generally filtered through a fine gauze when the tank is filled but there is little or no filtration preventing dirt already in the tank from being picked up and finding a way into the spray head which generally jams the spinner affecting the quality of the fuel spray.
Cleaning the spinner and nozzle might work for a while but only a major clean out will restore reliability until the next time. It is also wise to check and adjust the pressure of the air pump.
All-Pro SPC-85 Utility Heater
Check the thermocouple, it is a very small diameter copper wire that goes from the gas valve to the burner. Make sure it is being hit by the flame. If it is, remove it and go to a good hardware store with it and get a new one.
Not finding what you are looking for?