Acer Veriton - Recent Questions, Troubleshooting & Support - Page 2

NO DISK How to restore acers to original settings

Check that the speaker cable is plugged into the GREEN ringed "Speaker" jack (for a normal stereo sound set up). Check that the speaker isn't muted in system tray. Right click the speaker in the system tray. Click Volume Control Options and make sure you have the analog Realtek Audio selected - not any HDMI or Digital output. Open "Control Panel" in Windows. Open "Device Manager" found in the "Hardware and Sound" heading. Locate "Sound, Video.." Make sure there is no small icon over it to indicate that there is a problem. If there is, click the triangle to the left and open "Realtek.." Right click it and select properties. Click the Driver tab and then "Uninstall" If an option to remove files is presented - select it, too. Click OK to uninstall. Reboot if prompted. Allow Windows to find the "new" Realtek hardware and download drivers from Live Update. Sound should be restored. Make sure that you have selected Analog

https://www.manualowl.com/p/Acer%20Computers/Veriton-3600GT/Manual/65803 A MANUAL.

bad or unseated ram

Windows XP Service Pack 3 ISO 9660 CD Image File

Pull up you search bar you use to find your files. Type in msconfig this will open a window click the tab says BOOT. Click the OS you want removed and click the delete option in under window,

So you are wanting to upgrade the video card im guessing using the pci express slot. You will need go into the bios and disable the on-board graphic card and tell it to look at the pci-e slot for video boot.

check all fans are working and that its not over heating

There is a switch on the case that is indicating it is open. You need to shut the case properly to stop getting the message or fix the switch closed.

First check to make sure the video cable is properly inserted (also make sure that it is in the correct port - some PC's have two video ports - one integrated into the m/b and another added to the slot) Try going into the BIOS to see if the video is working at all (try tapping on the DEL key when starting up) When in the BIOS check to make sure the correct video port has been selected Sometimes some monitors can be reset by unplugging them, holding the power button for 15 seconds and then try powering them up.

http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer For Windows 7

Then there is no output from the graphics card. This needs replacing, as there should always be some output, even if it is wrong! Try pressing F8 on start up. This will eliminate the graphics drivers and default to a plain VGA configuration and see if you get a display, if so your graphics drivers need changing. If you get no display then the graphics card needs replacing.

Power supply failure. Replace it. Get 50+ more watts than the original. Power supplies are inexpensive and can be replaced without affecting your operating system or programs.
BTW: Many "failed" power supplies still can deliver enough power to spin fans and turn on the lights.
I recommend: www.newegg.com

If this helps please vote for my solution.

There is an option in your router to disable that option. You have to get into the settings for the router you have. Typically you can open up a web browser and type 192.168.2.1 and it should give you a log in window. If you have not set an admin password for the router just leave it blank and hit ok. Look on the left column to find "guest access". Click on that and you will see the option to click disable. Hope this helps

The carrier is responsible for your loss. Contact the carrier.

format your os

normally you have to setup bios not check chasis open. or you have to cut circuit sw for chassis check. good luck my friend.

if you have problem with installed driver. you can use driver pack solution to find any driver on your computer. it easy to results your problem. good luck my friend. this mian board support windows xp & vista you can download all drivers for m661 from this link below. http://www.acer.co.th/ac/th/th/content/drivers

ENGLISH PLEASE.

By using window CD you can repair your operating system .