Acer Veriton - Recent Questions, Troubleshooting & Support

NO OS told aT ALL , A RELIC 2007 DESKTOP RUNS XP ? OR VISTA. Does the maker of this game say it runs on XP or Vista. well most do not. all that ended 2014. or turn off sleep mode ,run pC POWER SETTINGS IN CP AS PERFORMANCE MODE AND NO USB SLEEP EITHER. V2 IS FOR 1998 PC ONLY SAID THE BOX NEW NXT V2, THAT? This toy goes back to 1985 NO exact model told but RCX is 1996 so says the wiki. (RCX is IR comm interface USB) 1998 is yours I think. https://en.wikipedia.org/wiki/Lego_Mindstorms#LEGO_Mindstorms_and_RCX_(1996) quote there about XP OS The IR interface on the RCX is able to communicate with Spybots, Scout Bricks, Lego Trains, and the NXT (using a third-party infrared link sensor). The RCX 1.0 IR receiver carrier frequency is 38.5 kHz, while the RCX 2.0 IR carrier frequency is 76 kHz. Both versions can transmit on either frequency. The RCX communicates with a computer using a Serial or USB IR tower. As the RCX is discontinued, support for the interface is limited on more recent operating systems than Windows XP there is no support, at all now. for sure newer OS no OS told by you at all. and makes answers impossible. (accurate)

Hi need help asap.
I opened my acer desk top box to clean dust out and now has warning chassis open.
I cant access the bios or anything else. Does someone have a suggestion????
Panicking

If this is the promblem with any music player in your computer than their is no sound driver installed or some sound files are missing to check if the sound driver is installed you can open the control panel---->sounds and check if the driver is installed if it is not you must install it using the motherboard CD that came along with your Pc

Hello,Change the power supply and restart your pc. This will happen when the power supply has gone bad. It sends power to low voltage items but not the needed voltage to power the system on. Good LuckC2Solutions

look and see if this link will help you out. Acer L410 will not load windows vista Google Search

looks like old xp machine. power supply could be flaky,bad caps on the board,dust build up on the cpu fan or graphics card causing it to over heat and shut down

That motherboard will use any of these 3 memory sticks.IN PAIRS.if you just put in 2 make sure the go in the same colored slots. DDR2 PC2-4200 DDR2 PC2-5300 DDR2 PC2-6400 Each slot will take upto a 2gig memory stick.For a max of 8gig. Use matching pairs.

What cover?

You can try driverguide.com

If you have windows 7 and windows 8, your computer must be running in VGA driver by default, as no driver is present, run windows update, it will install all the required updates automatically . Or you can go to device manager in system under control panel, and manually update driver searching from internet.

Mo bo is not posting. Either you have a bad peripheral, memory, or a bad mo bo.

Hi,

it is not complicated for upgrade the desktop.as per my knowledge ur system configuration is-

Key Features
Form Factor Mini Tower
Processor Intel Pentium 4 1.6 GHz
Installed Memory 256 MB (SDRAM)
Operating System Microsoft Windows XP Home Edition
Recommended Use Business

ur system processor and memory both will be upgrade.
 
Memory-
RAM Technology SDRAM
Installed RAM -256 MB 
Max Supported RAM 3 GB
Installed Video Memory 32 MB

Processor-
Processor Type Intel Pentium 4
Processor Speed 1.6 GHz
Processor Manufacturer Intel
Processor Upgradability Upgradable

Audio / Video-
Audio Output Type Sound Card
Max. Video Resolution 1920 x 1440

Hard Drive-
Hard Drive Capacity 40 GB
Hard Drive Interface DMA/ATA-100 (Ultra)

Thanks,

Unplug all power cables and check for bad connections. Reconnect all cables. Does the power supply fan rotate? Yes or No? Looking through the vented left side of the tower with the power cable plugged in do you see an LED lit? If no fan spinning in the power supply and no LED lit, then I suggest you change the power supply. Either do it yourself (very easy to do or have a tech shop do it for you - it's cheaper to do it yourself). 1. Un-plug all power cables. 2. Unscrew side panels. 3. Count how many of each type of power cable is required for on board devices. 4. Calculate power requirements by watts. 5. Purchase new power supply that has the cables you require and the required wattage to support your devices. 6. Unplug all power cables inside. 7. Plug in new power supply. 8. Plug in power cable first before turning on the computer. The green LED on the motherboard should come on. Congrats you have power. 9. Turn on the computer. 10. Enjoy!

is there power coming? if yes remove the side cover and remove cmos battery and check if it is working, replace the battery if that doesnt work remove the ram and check if it beeps if it beeps replace the ram

Did you put the jumper back?