Acer Aspire - Recent Questions, Troubleshooting & Support - Page 9
Lines in the screen
The screen is going bad. You will have to get a new screen or get it repaired by the company.
How to install windows 7 on aspire t650
Restart your computer during the boot process you will see on the screen to press a certain key to enter setup usually the delete or F2 key
Press and hold that key during the boot up process to enter BIOS then using the arrow keys scroll down to advanced bios features press enter change your first boot device to cd press escape then press f10 to save to cmos to restart
note this will erase you operating system you will have to have an operating system disk to load it onto you hard drive or create a partition to load another operating system
note after you have loaded the operating system you should go back and change the first boot device to failsafe or optimised defaults
after windows has loaded
your computer will automatically restart it might restart 2 times one to finish the installation
the next will be because the operating system is loaded and will boot from your cd
or
http://100-downloads.com/publisher.php?pb=http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool&dl=727
Microsoft .NET Framework 2.0 must be installedhope this helps
It wont boot - nothing on screen, cant open in
One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive
Test the leads that attach to your ((hard drive from the motherboard)) or replace all the leads that attach to your hard drive including electrical extensions + IDE,SATA and the ones that attach from your ((motherboard to hard drive))
or just replace them they are probably old and faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error
hope this helps
Oxc0000098 error
hi friend,
That problems cure only one way. i.e., change and reboot the OS. All error are deleted.......
Computer wont boot and i cant get to the start screen to try rec
The computer needs maintenance periodically just like a car needs servicing. The computer generates temporary files when it is running and these consume hard disk space if they are not removed, also these files will slow down your computer.
To service your computer you should at lease once a month do a Disk Cleanup and a Defrag.
The Recycle bin should be emptied periodically.
To do a Disk Cleanup Click on My Computer, then right click on the C Drive, then click on Properties, then Disk Cleanup, then tick all the boxes to recover the hard disk space. (This process could take a few hours depending when it was last done and the size of the hard disk).
To do a Defrag, click on Programs, click on Accessories, then System Tools, then Defrag. then select the C Drive, then start the Defrag.
Again this will take a long time, you may want to start these processes overnight, don't stop them let them run till they finish. The next time you run them, it will not take as long.
Acer 5520 notebook startup issues
You are missing the file NTLDR.exe and NTKRNL.exe. NTLDR is the first file your computer sees when it is booting up and it brings up other files to get your computer started then it turns it over to Windows file called NTKTRNL which actually brings up the Windows operating system. The only wayto fix is to find a Windows disc and copy them over to three folders that you have either win32, windows or winnt. Copy to all three if you see all three buy only one of those starts your system and it seems like it's win32 based on your error, folder under your C: drive. That will solve your problem and your computer will boot up normally.
Vga driver
You can look in your bios if you didn't turn it off by chance.Otherwise you erase it from your hardware and look for it again in new hardware and install.
My wireless card light comes on but I still am
Right click on the wireless internet icon on the lower right of your screen. Then left click Troubleshoot problems.
If that doesn't work, go to Device manager, network adapters, find your wireless adapter then right click on it and then select uninstall device. Restart the computer and it will find the port & reinstall it for you.
Enter current password
if you want to restart your computer you can push Alt and f10 as soon as you see the acer logal. just push alt then f10 then alt then f10 untill it comes to this page where you can restart your computer but it will be set back like if you just got it and if it came out of the box so everything will be erased
Acer keyboard messing up
Fantastic! I was just having the same problem when I read this article and pressed FN+NumLk(F11), then the keys started to work properly again.
Not finding what you are looking for?