3M Air Tools & Compressors - Recent Questions, Troubleshooting & Support

Great stuff, tons of uses

Operating manual for safeway foot spa

you did not state what paint and what gun and what pressure - telepathy is overrated and works only in the movies... if you use two pack mix - on the package is clearly stated how much part 'a" and how much part "b" should be used, you can then add up to 20% of thinners if allowed in particular paint. you need to pay attention if mix is by weight or by volume, light paints are usually by volume, paint should be rather light oil to water consistency in low pressure guns, if gun nozzle is below 0.8mm strainer must be used (190micron is ok) above that you can use your old pantyhose to strain paint after mixing. hope this will help you at least a bit...

The absoluely enviromental friendly remedy is boiling water directly on the mound. Be careful of yourself and the hot water will kill other plants. This is 60 per cent effective so repeat as needed. The second home remedy is a mixture of 1 half ounces of Medina Orange Oil, 3 ounces of Dawn liquid soap nd 1 gallon of water. 99 per cent that the nest is gone.

oil it

cool

ring your provider they have it.....

There are very few things you can buy now that are not made in China. Unless you want to pay top dollar and get the same thing made in Europe. We are in a "disposable society". B & D has only done what it had to to survive. I would not doubt that it actually a Chinese owned company now. That have done that with several former U.S. owned companies that were failing, and moved them to Chaina.

Your paint is too thick.

Check for leaks https://www.google.com/search?q=SINC+Compressor+low+sump+pressure+error ..