3Com SuperStack - Recent Questions, Troubleshooting & Support - Page 9

Configure the 3COM to direct all incoming 3389/TCP traffic to 3389/TCP on the "private" IP-address (192.168.xx.yy) of your server. Configure your server to "allow" Remote Desktop connections, and add the ID/password details that will be allowed to login to your server.

Usually the upgrade routine is in the router program. Log into the router and find the option to upgrade to latest firmware.

This is troublesome - but you can find information on 3Com's website. The following URL should get you to the install and configuration guide (Item 14) for your router. Hope this helps... http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/search/?sp4ts.oid=4235732&spf_p.tpst=kbSearchMain&spf_p.pbp_kbSearchMain_myAction=withResults&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken#searchResultHead

If the whole network looses connections when you connect the two switches together, there may be a loop in the network...that is, there could be another path for data to pass between the switches. Typically this is caused if there are two cables connecting the switches, but it can also happen if there is another switch or other network device connected to both switches.

this could be a problem with the second switch unit. what happens if you connect a pc to this cable, is that intermittent, if so, that is your problem. try fault finding with a LAN cable tester to see if there's any issue with the link cable.

To make it a factory reset, you have to enter its service mode option. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter". http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.