3Com SuperStack - Recent Questions, Troubleshooting & Support - Page 4
Db9 rj45 pinout
Here is the standard pinout for a console port on a router to seriel port for computers
We have a 3CRWDR101A-75 3com
The downloaded file is "corrupt", and thus it fails the "verification" process.
Download the firmware again, and compare the two files.
Or, use a different computer to download the firmware, and to do the firmware-update.
7/18/2019 9:10:00 AM •
3Com...
•
Answered
on Jul 18, 2019
Default gateway
Depending on the mode the phone is in, it may be only a layer 2 device - meaning it just broadcasts at layer 2 to find the NBX and once discovered, uses layer 2 for all communication.
A user's phone calls keep dropping out during
I would recommend starting with what is simple.
Have you tried replacing the Ethernet patch cord that the phone is connected to?
How about the curly cord between the phone and handset?
Does the phone do the same thing if you connect it to a different port?
Does a different phone do the same then when connected where this phone is connected?
The connection is limited
If you get a 'Limited connectivity" on you wirelessconnection on your laptop, it means that the wireless card on your laptopprobably did not get an IP address from the wireless router. To fix this problem, right click on the wireless icon on the Task bar and thenclick Repair.This will force the wireless router to issue a IP address to the wireless cardon the laptop.
4/1/2018 11:50:08 AM •
3Com...
•
Answered
on Apr 01, 2018
Dear Vendor,
I have a problem
You can log into a Switch 4500G Ethernet switch in one of the following ways: ? Log in locally through the Console port ? Telnet locally or remotely to an Ethernet port ? Telnet to the Console port using a modem ? Log into the Web-based network management system ? Log in through NMS (network management station)
Not finding what you are looking for?