Questions & Answers for: zx 8 enclosure

...ebay and the drive met all dimensions except depth: the drive was at least 3/8" longer than the enclosure. Where can I find an enclosure/kit for this drive? Hi You must buy Buffalo external drive ...

...8". Every enclosure is custom made for the amound of Xmax, QMS and specs of the subwoofer. Putting a bigger sub would acutally not sound as good as an 8, because the box was calibrated for it. Get an ...

...flange nuts on a ZX 7R. There is nothing in the manual except for 8 mm 10 - 13.5 ft lbs use red lock tight and go around 12 ft. lbs thats what I set mine to on my dirt dragger which is an older ...

what type of box should I use These subwoofers are designed for Sealed OR Ported applications. If you are looking for BASS - and not concerned about sound quality - a 1.0-1.5cu ft (ea) enclosure is ...

what size enclosure should I put these 10" woofers in According to the specs for the 4710 subwoofer, I would recommend going with a 1.25 - 1.75 cubic foot sealed enclosure, or a 1.5-2.0 cubic foot ...

...side or back of the box, the other way is up side down/ reversed http://www.billkatz.com/images/ces_pics/ces_subwoofers.jpg Any sealed enclosure will do, 8 inch are not that powerful so any

should i put the speakers in a seald box or ported box? I would suggest a ported box. But size of the speaker and size of the enclosure makes a big difference. I would suggest either going to the ...

8 GB drive in an I/O Magic enclosure with a flexible USB connector that stopped responding recently. I suspect the USB connection has failed, not the drive. I would like to recover the contents of the

ZX 4810 subwoofer, and it didnt come with any instructions, specification sheets, or literature of any kind. I want to build a custom box for it, but I need all the specs.I've googled them and been to

...enclosure 9-3/8 x 5-1/2 x 3-3/8 T101 is 120Volt timer in NEMA 1 indoor enclosure 7-3/4 x 5 x 3 Open following links for resources: ...