Question about 1995 ZX-6R Ninja
88 zx6r c-model breaks down runns on 2 cylinders tach bounces when you first start it you can drive all day till u shut it off and re-start it ,then it wont stay runnin it sounds like its running on 2
...coil resistance within limits,fuel pump and relay okay. decided must be cdi bought second hand one .fitted it and tried to start bike with gravity feed. bike started straight away, ran it for 20 secs ...
...zx6r ninja cranks but no start, not getting power to fuel pump, and no spark but power to coils.I've replaced wiring harness and relay box.please help. pss throttle bodies secondary butterfly valves ...
...coil on my zx6r f3 hi getting around 5 to 10vlts when the bike is running but the r/h coil is only receiving around 00.5 volts when the bike is running, both power wires are geting 12vlts, the bike ...
...ZX6R seems to cut out when I drive in rain, as if it runs on 2 or 3 cylinders. Then 'n stop under a bridge and try to warm up the engine by keeping revs high to get rid of the moisture, after that it ...
...coil and plug no fire,is anyu way to be sure its the ECU or Crank sensor,or something as simple as a ground wire I'm doing the same thing with a 09 zx6r motor and ran into the same problem came to ...
...zx6r 1999 electric shocks off fuel tank the bike is misfiring and giving electric shocks to the fuel tank, changed the coils but not new, can any one help please? Negative earth wiring systems need a ...
Question about 1999 ZX-6R Ninja
...coil, battery or plug between ignition sensor and CDI box. Spark plug cables in bad condition and shorting check for leakage in the dark, cable connections loose, or connected to the wrong ...
...zx6r Im not to knowledgeable and the only silly question is the one not asked so , got a question for you all .. tks in advance for any help.. My bike idles good works in 1st gear but when I shift to ...
Question about 2001 ZX-6R Ninja
ZX6R when I it's a project bike just working on it trying to get it put back together it's in bad shape but I figured it'd be a fun project well I didn't know that the ignition was completely gone the
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions