Questions & Answers for: zero ink printer

ink level counter. If it reach zero, chip can't use. Check chip contact at ink tank, and chip connector at head carriage. Don't be frustated, man. I have thousands experiences like that. Two unsolved,

...(that reach zero) use hardware resetter or use use chip with autoreset function. Ink level reach zero is ink out, after resetting ink level reach 100% (full). But it's just program, not

zero. you will turn off printer by button POWER.The waste ink pad is in the bottom of the printer.You need to disassembly the hole printer to find and change it. To reset waste ink counter: Press Menu

...zero level (ink out/empty level). Ink tank can not use again even there are ink at tank actually, because chip reach zero level. Reset chip using hardware resetter and you can refill ink tank. 1) ...

...zero ink level (ink out in program). After replacing black ink, may be the other ink tanks reach zero level, so message to replace ink tank appear again. You can use the used ink tank (by refilling) ...

ink absorber. There are two in the MP150 and they cost about $15 each. I have found though that you can just reset the counter and let the printer run without any problems. I have done this with three

...zero 7. You will turn off printer by button POWER Some time of other you will need to clean out the inkpads that are in the printer or it will in time leak the ink out. Please come back and just gave ...

...ink level counter reach zero level. Cartridge can not be used again even though it was refilled, because the counter still reads zero level.Replace the new cartridge or reset the counter using ip1600 ...

zero ink is coming out when I print. The ink cartridges are new. That might have something to do with the issue, but it seems odd that zero ink would be coming out at all, black or color. 90% you need

...ink cartridges so that they cannot be refilled the only way to refill them is to never let then run to zero percent once they reach zero the printer prevents them from operating if you do catch them ...