...to tell which joints are greasable. But, the parts that could have a zerk fittings on your van include the outer tie rod ends, and lower ball joints. So just take a look and grease where
...drums you will see where the brake lines enter the drum itself,, near there you will see a little ' zerk ' fitting -- to this fitting you should place a clear hose over this fitting and run it into a ...
bleeding brakes bleeding the brakes - look fo the bleeder ( zerk fitting ) on the side of the caliper, attach a 1/4 inch clear hose to this fitting and run hose into a catch pan or bottle,, make sure ...
...fittings on my 1997 lumina 4door,A/T 3.1 litre Unless the outer tie rods or lower ball joints have been replaced than there will not be any grease zerks. If the outer tie rods have been replaces the ...
Question about 1998 Tahoe
...zerk, not zert...and anyway, grease fittings have zerks, and brake cylinders and brake calipers have bleed valves. Zerks let grease in and somewhat restrict outward flow, while bleed valves let ...
zerk fittings what is the size of the zerk fittings for the fromt wheels? this depends, most are 1/8 " thread as in the ball joints,tie rod ends, that is if we are talking of a car but you dont ...
where are the grease zerk locations Tire shop is telling me there are no grease zerks on this vehicle to do a lube job On most newer cars there are no zerk fittings.
Question about 2000 LHS
How do you remove a Zerk fitting to replace a front wheel on a lawn tractor? zerk fitting doesnt hold a wheel in place --most are held in by C or E clip others are a washer with a split pin and a zerk
Zerk fitting locations on 1997 Mercury Grand Marquis There may not be any. Most manufacturers are putting 'permanently lubricated' joints in the front suspension for upper and lower ball joints, tie ...
1996 ford thunderbird grease zerks how many? Probably none. Zerk fittings have been eliminated.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions