Questions & Answers for: Honda yellow frame

...frame above the stator area. you can identify this by three yellow wires going into it. either one can be tested the regulator can be tested at a local dealership. and the stator can be tested by ...

Ad

Question about 2007 Odyssey

1 Answer

...frame as the front) you might be able to shake it out but if not there is a couple of wires that you need to unplug one is 16 pin plug. that runs the power just pull the clip off and unplug it by ...

Ad

Question about 2001 CBR 929 RR Fireblade

1 Answer

frame. cdi works, and everything else seems ok. i'm just wondering about the pulse generator. Two wires coming out from it, but only one is sending a pulse to the cdi, should there be two pulses casue

...frame crank..does it have a big bluish spark? if it looks redish purple no good..pulse generators need to be ohmd out for opens. if you"ve got "Good Spark" and "Good Voltage" push start the bike! if ...

...frame. 4) Hold the rubber head of the cable with rubber handled pliers (water pumps work great) using this to hold a side of the plug against the bare metal. 5) Turn the Ignition switch to ON. Crank ...

Question about 2005 Activa

1 Answer

...yellow wires are grounding you will have to replace the stator. To replace the stator you have to remove the motor from the frame or at least unbolt the motor and rotate it enough to remove the rear ...

...yellow plug that plugs into nothing.this plug is along the frame on the outside of frame but u have to remove fairing.its shutting off ur fuel pump n lights.my bike did this same thing at 17,900 ...

Question about 1998 Accord

1 Answer

...YELLOW circle of the SOLENOID is connected to a thick, heavy cable that goes directly into the STARTER MOTOR. The -12 volts from the battery is connected to the car's engine, frame and body. The ...

Question about 2005 GL 1800 Gold Wing ABS

1 Answer

yellow, blue, or green. They should say what they are. In the bike side, you already know you have a full time hot wire. Now you have to locate the "SWITCHED" hot wire. To do this, grab a tester light

yellow wires still got hot. What does this mean? Ther is a short to ground in that area. Power is going straight to ground. Hi the reg needs replacing its job is to transfer excess power into heat and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...