Question about HTR-6130 Receiver
audio connection into Yamaha HTR-6040 AV Receiver PS3 Blu-Ray connected to Sony Bravia TV with HDMT cable. DTVHD receiver connected to TV with HDMI cable and audio optical cable from DTVHD receiver to
...yamaha rx-v663 to play DDTrueHD or DTS HD audio Own a sony bdp-s301. Updated the bit stream to 4.50. When I play a blu-ray with Dolby TrueHD audio, my avr does not recognize the the audio. Dobly ...
...yamaha rx-v663 to decode DolbyTrueHD audio of get my SBL/SBR speakers to work without turning the bi-amp on. You should always connect with HDMI when using and decoding HD sound formats. If you use ...
...Yamaha RX-V663 receiver and I am having some issues with sound when watching blu-rays and hd-dvds. No matter what sound format the disc is in, it is only playing back under PCM on the receiver. It ...
Question about Rx-v465/rxv465 Home Theater Receiver
...Yamaha cannot decode audio in AAC or other computer formats, so be sure to change the audio settings of your player to output PCM and not raw/bitstream. Some times HDMI control ON setup (On Receiver) ...
Question about Rx-v465/rxv465 Home Theater Receiver
...audio inputs. http://www.retrevo.com/support/Yamaha-RX-V465-Receivers-manual/id/23270ag803/t/2/ Be advised that most commercial multichannel sound sources have been pre-mixed by the originators to ...
...and read up on DECODER. Page 61 (Troubleshooting: NO SOUND) suggests "A proper audio decoder is not selected". Try AUTO. Or, track the digital source of your TV audio back to make sure it still
...Yamaha RX-V667 Receiver is only passing through PCM audio - can I do some sort of factory/firmware reset? Firmware is 2.05. Not sure if this will help, but is the US ...
Question about RX-V361 Home Theater Receiver
...decoder, to the Yamaha inputs. See the picture I have attached for you.Then when you want to hear the sound from there, select DTV /CBL input on your remote control of the Yamaha receiver.Or you ...
Question about RX-V595 Receiver
Yamaha RX-V595 Receiver will play Dolby Digital 3/2.1 audio Blu-Ray disc with player set to bitstream but will not play DTS-HD 3/2.1 unless output is set to PCM. Is this an issue with the Yamaha Recei
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions