Questions & Answers for: xenyx 802

XENYX 802 plugged in a 220v power Hello, Just brought it from USA, I've plugged my brand new Behringer XENYX 802 into a 220v power.. It has worked for about 5 seconds and now it doesn't work at all...

...Xenyx 802 using the XLR cable but I have no input signal on the Xenyx. Phantom Power is turned on, pre-amps and volumes are also turned up. If my comment helped you find this problem, could you ...

xenyx 802 static in left output I turn it on and i get like this wave of static then it fades out but there is still a lot of static in the left channel. if its only on left channel you have to change

Is there a reset button on my 802? I do not remember if the powersupply is external or not either way there is no reset button the powersupply may not be putting out any voltage.

xenyx 802 with my pc? i also hve fca202... You can do it one of two ways when coupled with the FCA202. First, You can just come out of the main outs on the 802 via 1/4 in to the 202s 1/L in and 2/R in

...XENYX 802 audio mixer. this device is powered by a power supply that as input to the mixer gives 18,5 x2 Ac, 150ma. i would like to know in which point of the circuit i can apply DC , and the proper ...

...xenyx 802, is this possible? Would the split channels force the instruments to pan? Any help would be much appreciated? You could use the Left inout of one of the stereo channels. You can pan it with ...

xenyx 802 premium 8-input mixer worked fine for 1 day but now it sounds watery and behringer support was no help at all behringer told me by email to send receipt and they would give me details of how

...Fixya ..... please can you tell me the difference between UB802 and Xenyx 802 (apart from the colour!?) many thanks Richard The microphone preamps are different. The Xenyx has lower noise mic

i got behringer 802 audio mixer and a mic..what else do i need to start singing.. Please verify if your computer has a sound card. You will need a provision on your computer for audio input. Let me ...