Questions & Answers for: wrench light shuts down

...light to the number one[1] spark plug wire at the spark plug end connect battery connectors. 3 start engine and note location of pointer on the mark tab on the timing cover. 4 shut off engine loosen ...

light remains on and it will not copy the little wrench means it has shut down because it has exceeded the maintenance count, probably for the cleaner web in the fusing unit. Call service at 1 800 243

...light came on look like a wrench. my car started acting liking it was going to shut down. I dont know what it is can someone help me... This is the 1st time it came on. What does it mean? You need to ...

...shuts down @ temp, pilot goes out RMI-70LPT Sounds like the Oxygen Depletion Sensor (ODS), which part of the pilot, is clogged and needs to be cleaned. Also, check the connection of the Thermocouple ...

...light comes on then the a small wrench icon appears. The message along with check engine now says engine in safe mode. The car loses all pick up. whats the problem safe mode means the computer is ...

wrench light came on - which according..limp Customer Question My husband wash the engine of our 2004 Ford Explorer. About 2 hours later the wrench light came on - which according to the manual it has

...wrench light begins to flash. It has about 10 hours on the bulb and the latest software version. Are you sure about the software?. The lates version is v1.16. - Check the lamp blower, the blower is ...

wrench light comes on car looses power, shut car off restart no issues till later then light comes back on and car looses power run fault codes to find the reason that the CPU keeps going into limp ...

...wrench light on the instrument cluster that illuminates when a fault is detected. Faults are also accompanied by DTCS and the "Check Engine Soon" light. Your best bet is to take your vehicle to a ...

...wrench can be oil problem or the check engine light Thats your check engine light. Try to get the car to stay on 1st. Two foot it, 1 foot on the gas and the other on the brake. If it still cuts off ...