Questions & Answers for: workout machine wires

Question about Ultima WF860 Front Load Washer

2 Answers

...machine. We have checked the connections and drains etc, but everything is dry - even the door seal. Hotpoint will not offer any telephone advice and we cannot workout what the problem is. We ...

Ad

Question about Ultima WF860 Front Load Washer

1 Answer

...were motor has burning smell. belt and controller were replaced. treadmill shuts off still during workout. any idaes? May I ask witch belt? Most treadmills have two belts, one to drive the gearing ...

Ad

Question about Ultima WF860 Front Load Washer

3 Answers

...MACHINE. THE ELECTRONIC MONITOR DOESN'T WORK RIGHT, IT GOES ON BUT DOES NOTHING BUT 0'S ON ALL MODES. THE WIRES ARE HANGING BUT IT LOOKS CONNECTED. On these units trace the wire going to the frame ...

Question about RangePlus WRT100 Wireless Router

1 Answer

...verify that your machine can connect via another router. This will help to assign blame to router and you will have fewer issues to workout. You could also try another software: dd-wrt for the

Question about RangePlus WRT100 Wireless Router

1 Answer

...a Sole treadmill F85 purchased about 3 years ago with lifetime warranty. When my son would do speed workouts (he is a large kid, about 215 lbs), the machine would shut off after running a 5-minute ...

Question about TC1000 Treadclimber

1 Answer

...machine recently and towards the end of my workout the belts sped up uncontrollably. I went to start the machine recently and the belts do not move. After 10 seconds the E1 message appears. I have a ...

Question about TC1000 Treadclimber

1 Answer

...machine off about 10 to 20 minutes into my workout. A tech come out, made sure the belt was lubricated, and suggested using a 20 amp outlet. Same problem exists. Any other suggestions?? 1) You must ...

Question about Crosswalk 400e Treadmill Total Body Workout Fitness Equipment Machine

1 Answer

I have a preform crosswalk 400e, and the circuit breaker trips everytime I turn it on. The motor also runs for a second when I disconnect the wires to the motor it wont trip. I checked all the ...

Question about Crosswalk 400e Treadmill Total Body Workout Fitness Equipment Machine

1 Answer

wires to the motor. WHen the motor is connected, the motor spins when it first turns on for a second (despite the key being out). I bought it used today, and it worked prior to my transporting it home

...workout, why does it reset after 17-22 minutes? I did the Serial Test and the CSafe test fails. I checked the wiring and it's good. Also, where can I find a manual for all the test? Chances are all ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...