Question about Mobility AL410 Universal Inside Scooter Lift
the lift extended to far down and will not come up. need diagram to show how gear shaft connects to raise platform their should be a plastic plug on top of the cover, remove round plug and insert deep
Question about AL100 Universal Scooter Lift
I have a 2009 Ford Escape. I can install a 4 wire plug but what/where do I plug the 2 way into? That is the plug that is red/black. Do in need to cut this off and wire it to the battery? Do I need to ...
wiring diagram for Harmar AL600 Lift It is a simple circuit with 3 spdt micro switches, one spdt 12 volt relay, one stud mount diode, and two dc motors. understand but no wiring picture found for this
Question about AL100 Universal Scooter Lift
Lift works fine going down, but hangs up going up. The place where it stops is when the big roller starts up the angle on the lift frame, and then again when the steel rollar contacts the spring lever
ignition is loose sometimes, when switch is moved up or down (the one that raises and lowers the lift), it doesn't work. The key feels a bit loose - moves more than usual when turned on or off. I ...
Question about Hamar AL435 Lift - Axis III / 3-Axis Inside Lift - Power Lift
Harmar AL435 wheelchair lift arm will not rotate in and out (fuse not blown) Winch and extendable arm work fine. Thanx for any help. Gary Hallo, mayby late but I had last month the same problem. When ...
How to replace wheels on sl350 stairlift Did you ever figure out how to replace the wheels on your Harmar stair lift? I think I got the same problem, but can't find where I can buy the replacement ...
Question about Wheelchair Lift System - AL600 Universal Power Chair Hybrid Platform Lift
Harmar AL600 Parts Diagram Where can I find a complete parts List for this lift? I need a swing motor for a Hallmark Al 600 - 12 then motor complete that slides it into the vehicle my name is John ...
Question about Wheelchair Lift System - Power Wheelchair Lift AL300RV
al300 cannot lower the lift at the top of the control box there under a sticker or in a small hole there should be a 7/16th nut you can use to lower the lift manually. but could be a power issue trace
Usually answered in minutes!
8 Questions
4 Questions
2 Questions
1 Questions