Question about MultiSync MT830 Multimedia Projector
Double vision-without viewing under the influence I utilize my NEC Multysync MT 830 for tevelvision and DVD operations only. I see double vision while navigating the on screen menus, television and ...
...Australian website with no luck at finding the Device Driver for any NEC products. Therefore: 1. Navigate to the NEC American site : http://www.nec.com 2. Click the Downloads link under the
...see when PC comes on. This will put you into the BIOS. It should look like this. Use arrow keys to navigate to Auto Configuration with Defaults. This with set BOIS setting back original setting
...what you see on the screen in the field of the translator and hit the translate button in order to navigate through the menu to change the language. OR if you still have the user manual, im sure ...
...5 mins, 10 mins, 1 hr., etc., etc. Mine stays on all the time! To change this, do the following: 1) Navigate to the Control Panel by clicking Start and then Control Panel. Then double click on Power ...
audio output drivers Nec.com carry all drivers suitable for their laptops. Go online and navigate to your model and download, for free, any drivers you require.
Words are spelt backwards Picture is backwards Your projector has been set up for rear projection mode (projecting the image from behind a translucent screen. You need to access the setup menus and ...
Question about Display NP-V260X Dlp Projector - 3D Ready 1080i HDTV 4:3 F/2.41 2.55 NTSC, Pal, Secam 1024 x 768 XGA 2000:1 2600 lm HDMI VGA Ether278 W 2 Year Warranty
.../ reset/clear lamp hours, all the buttons needed are on the box, push menu & with the cross navigate & with enter confirm selection, exit gets you back at any time, on the nec/support ...
Question about VT695 LCD Projector
...HOURS FILTER HOURS AND RETURN THIS PRODUCT TO FACTORY SETTINGS For the lamp all you need to do is navigate the menu. This option is always somewhere different in different manufacturers but it ...
Question about VT695 LCD Projector
...To reset the timer on your NEC P350x projector, press the Menu button on the remote control. Then navigate to the "Timer Settings" menu and select the "Reset" option. To turn on your NEC P350X ...
Usually answered in minutes!
75 Questions
41 Questions
39 Questions
27 Questions
39 Questions