Questions & Answers for: wont led bulbs work under

...work. I've checked the bulbs and even used a meter to see if there was voltage in the socket. No voltage. the 20 amp fuse mounted in the unit checks ok and everything else works fine. Is the control ...

...wont cover bulbs. i have the same problem with my brake light its not the brake light but the led computer board at the bottem of tail light assembaly unfortonitly toyota dose not sell that led ...

...wont work / the bulb for the light burnt out. the bulb got broken trying to remove. I think it might be the fise, but i dont know where its located. Its a under the cabinet microwave. TOM Mine is ...

bulbs. Some were out and I accidentally bought 20 watt, but they all seemed to work fine. Now a section (about 5 lights) is out. Other sections are on and fine. How do I fix this? you over loaded that

...led indicating that the lamp housing is not installed properly. I have re-installled the housing several times with the same results. A blinking yellow light.Please assist. Make sure lamp cover is ...

...LED BULBS IN MY FRIDGE. TAKE OLD BULB OUT AND BRING IT TO YOUR LOCAL HOME DEPOT, OR ACE AND ASK ABOUT LED OR A DIRECT REPLACEMENT ..UNDER $20.00 .. I LIKE THE LED BULB IT SAVES MONEY ON POWER AND ...

...LED bulbs are more reliable. You can get better quality LED Bulbs that give the same light as a normal bulb. You can use higher wattage LED bulbs, but only up to the same level as the light fitting ...

Fan works fine but lights do not come on. Replaced the bulbs but still doesn't work. Any ideas? Changed bulbs. LIGHT S/W OR LIGHT SHOCKET

...reset the unit. Most of those wont ever see an LED because the LED wont draw enough current. Then control box depends on a current draw in order to stay on. LEED bulbs don't have enough current

...under the top cabinet edge. The are protected from damage, so use a mirror to look in that area. It is normally a 25 watt, SES cap Appliance Bulb. In more moderm fridges, LED lighting has taken over. ...