Questions & Answers for: Harley Davidson wobble in spin

vibration in handlebars/forks?? I went for a ride today, which was good for the most part. Upon returning home, I was heading down some side streets (25mph zones), when I would start in a turn (either

a road problem or tire/spoke problem? If you can get the front wheel off of the ground, spin the wheel and check the tire for the wobble, check the axle for looseness, and the rim to see if it is bent

2006 FLSTCI, 10125 mi, when running 55 or above bike may start "wobbling", feels like rear tire is low but it isn't. Slowing down makes it ride normal. The first thing I'd do is have the wheels and ...

...I replaced the bearings on both cams. The bearing in the plate were loose allowing the cams to wobble quite a bit. Changing them really tightened the cams up. That and with the tensioners I was ...

...replaced the bearings on both cams. The bearings in the plate were loose/ worn allowing the cams to wobble quite a bit. Changing them really tightened the cams up. That and with the tensioners I was ...