Questions & Answers for: wml520

Hotpoint - WML520 washing machine - Not pumping water The wml520 does the wash, but does not spin and pump the water out. Have checked the drainage pipes, but they're clean. Any advice? You could have

how do I remove the powder draw from the aquarius wml520, please? 1. Extend the dispenser drawer until the stop is reached. 2. Press the locking tab located in the centre rear of the drawer and pull ...

need to fit new door seal to hotpoint wml520 http://www.youtube.com/watch?v=HOrLIcgy81k this should help you fit a new door seal 

draining prolem flashing lights and not pumping out the water, not completing a cycle. Have you checked the pump filter for blockages? I had the very same problem and this was the cause.

how do you take the cap off to check the filter is'nt blocked Wheres drain plug usually at bottom front face filter often behind drain plug

how do you get at the filter? the filter cap will not turn It should be at the front of the machine down the bottom or underneath th machine.

WML520 Not draining water I have a Aquarius WML520P washing machine, it will wash, but then it will not drain, after manually draining it will then spin, but again will not drain. i have changed the ...

hotpoint wml520 flashing lights all leds horizontal extra rinse etc are flashing you have a problem with the board

NOT Filling with Water STarts Cycle then top light flashes and it wont fill The filter at the back of the inlet valve may need cleaning. The inlet valve may no longer work.

Hello I've got a Hotpoint WML520 washing machine. I've changed the door electrical switch a few times due to it keep melting. Does anyone any ideas why it keeps happening? Thanks. They melt due to ...