Questions & Answers for: Land Rover wiring loom

...wiring loom is already in the car thank you jim cowd. any aftermarket lights have to have the wire loom ran. when you run the loom make sure that it is protected and out of the way of things. also ...

brake lights not works o/s and n/s brake lights not works centre light working ok, all new bulbs.thanks. have you fitted the right bulbs ???check contacts on bottom of bulbs one or two pins.if appear ...

...more positive the reason it happens is the oil slowly works its way along the wiring loom between the copper strands and the insulation the whole problem is the injector loom inside the cylinder ...

...wiring connects to the chassis loom.normally a quick clean and grease of the connections works wonders I have this same issue. I have a 2002 freelander with a brake light issue as well where is the ...

schematics for Spark plug wire installation Hi, If you are planning on replacing plug wires on a Discovery this solution will help. This task requires minimal tools, with fair to moderate mechanical ...

...wiring loom. Start by disconnecting the trailer connector and checking on the vehicle socket for an indication that voltage is present by using a multimeter or test lamp while the brake pedal is ...

wiring loom diagram for a 1997 Range Rover. (It's not a Discovery) try this link - To DOWNLOAD the RAVE Manual, follow this link http://www.landroverresource.com/ be prepared to do some digging. Rover

diagram for an ecu on a land rover disco got oil in the wiring loom of my car You can access that info Here, fixya however doesn't have access to the factory manuals.

Wiring td5 Landrover steering column horn Unable to locate socket to twin wire plug probably services horn and cruise control are you doing work in this area and have this wire left over and can't ...

2000 landrover disc. rear signals not working but front signals are can anyone please help check the rear lighting wire loom from rear of light clusters ,trace the earth wire to the body/chassis ...