gauges not working after the car had an accident on the left side ,the wire loom was cut between the chassis and the panel. we fix the wire loom now the car start and run well but ,no check engine ,no
...wiring harnest is good. hi fred the earth wire from the plug wiring loom, to the body may need cleaning, follow it back to find out where it earths.take out screw and use a small piece of ...
my grans hyundai getz 53 reg had an abs fault, i tried my bosch kts an snap~on solus but would not give any fault codes, i borowed a friends diag tool an it found an engine mgnt fault in abs system, i
Question about 2000 Elantra
...it. Thanks Check the wiring on the hatch loom,from the loom flexing the wiring inside breaks and shorts out ,just split the rubber cover and check the condition of the wires[this is a common
Question about 2003 Tiburon
...wiring colours to the rear light cluster. i.e. what colour wire goes to the near side flash, the fog, offside flash, offside tail, brake, near side tail and reverse. Many thanks Hi There. Im not sure ...
...in the inside,i bought a wiring harness(loom) from a scrapyard(elantra gls) can you please tell me where to find the wiring diagram for the gl as well as the gls local parts stores or public ...
...wiring loom damaged,one wire cut several grazed(all fixed up now)no headlights,electric windows or heater blower working now.....all three wires going to the main beam have 12v going through ...
Question about 2006 Sonata
this vehicle belongs to a used car dealer it came in a code for right seat belt pretenioner onthe right frt. seat he ordered a mew part and ad replaced and code cleared at another shop then the air ba
...wiring loom. I have a 2012 Hyundai ix35 & have fitted a towbar & wiring loom. The reversing sensors continually beep when the trailer is connected & reversing. in the loom there are 2 thin grey & ...
Question about 2006 Sonata
...Broken wire somewhere in the wiring loom to that door, check where the wires keep bending, or check with a multimeter the contacts where the door contacts meet the frame contacts, clean
Usually answered in minutes!
1,503 Questions
1,180 Questions
1,131 Questions
1,254 Questions
1,082 Questions