Question about 2-wire Pull Chain Light Switch For Ceiling Fan Lights
...wiring in a ceiling fan light kit 1 blk, 1 wht wire coming down thru fan to 4-light kit - replacing 2-wire pull chain switch, but (dummy me) removed old b-4 noting how wires were connected - 2-blk ...
Question about 1997 Wrangler
...wiring harness somewhere for this options? My jeep did not have the option of a dome light from the factory. Thanks, Come off the fuse box on a fused circuit that is from a battery wire. Always hot. ...
Question about Ivory Decora Switch & Pilot Light 20a 5637-i
...wiring sheet. Thanks This is a single pole light switch and should be wired as any other SP switch. The only difference is that is has a pilot light. All the white neutral wires are tied together and ...
Question about Classic Hugger Polished Brass 52" Ceiling Fan
Replacing a ceiling fan pull chain light switch. I am replacing a ceiling fan light kit switch. It is a pull chain switch with a black wire, a blue wire and a red wire. The pull chain switch controls ...
i have a 3 way fan light switch but wires don't match the colors on my hamton bay fan what wires go where i have a black wire and a brown wire and a grey wire on the switch in the hamton bay i bought ...
Question about Legrand TM8111 Three Single Pole Switch
...light connect to other white neutral wires and covered with wire nut. Wiring at switch: Black Hot wire from ceiling box connects to A COM terminal. White wire to ceiling light connects to A SP2 Red ...
how do I put a light switch on a extetion cord You want a light switch on extension cord. What kind of light switch do you have? You posted under GFCI device which is totally different than ordinary ...
I have a light switch with 3 wires that have to be hooked to it.3 black wires 3 white wires and 3 ground wires.The light switch has 1 place for the black 1 place for white and 1 place for ground. You ...
Question about 2004 Taurus
I have a 2004 Ford Taurus whose parking lights will not turn off. Sometimes they just go off eventually, sometimes the battery has to die in order for them to turn off. How do I fix this? Sounds like ...
...wiring to switch the light that stays on must be wired to the wrong side of switch. disconect both wires from both lights and double them up and reconect them where the light that turns off was wired ...
Usually answered in minutes!
627 Questions
549 Questions
535 Questions
166 Questions
208 Questions