...fitting I have a 2006 renault scenic 2 and want to fit parking sensors. Which of the wires in the rear light assembly is the reversing light ? The wires are in terminals numbered 1 to 6. use a test ...
...wiring fitting instructions? Could you tell me which wires should go where? Radio Constant 12V+ Wire: Orange/Light Green Radio Ignition Switched 12V+ Wire: Yellow/Black Radio Ground Wire: Black or ...
...light fitting (found by a careful visual examination or a gentle tug on the 'connected' wires). This is not uncommon with solid conductor (non-stranded) wiring, particularly if the wiring is tight or ...
...light still on after fitting new pads Hi did you fit new pad warning wires. If there is a break in the wire the light will stay on. Even if you did fit new wires, the wire could be broken you can ...
wiring. I got a spare piece of wire and ran a jumper cable from the silver track on the light fitting relating to the green red and silver wire ( top left track ) to the light fitting and another wire
...wiring out there are simply wired in to the rear tail light circuits such as: Trailer stop lights wired to vehicle stop light circuit in eighther of the rear tail lights. Trailer park lights wired to ...
...light fitting has three wires fitted: Red, Brown and Blue. The old light had, coming from the switch (indoors), only Black and Red. Please could you tell me how to wire the new light. Is it Red to ...
Question about 2006 Grand Cherokee
wiring kit but do not know how to fit it if you have the proper kit , the it is a simple matter of pulling the harness connector from a tail light assemble and inserting the harness on to the assembly
Question about 2006 Grand Cherokee
...your having issues with a faulty brake light check the fuses, bulbs and wiring connectors on the back of the light fitting. It is usually a lot easier to simply replace a faulty light
Question about 2006 Grand Cherokee
...wiring connects to the light fitting. This tests the light fitting itself. Follow the wires back and find where the trailer wiring connects into the wiring harness then check for voltage before and ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions