Questions & Answers for: Miele wire mesh

...rempty machine, remove drain plug, wire mesh scoop water in middle, then take off the plastic cover with a steel like wire on it, clear out the **** blocking the pump, assemble then should be

...mesh - find a plastic contraption with a steel wire running over it - push wire to inside and lift the plastic housing - what you know the drain pump - check there are nothing stuck in the fan like ...

mesh on bottom-locate the steel wire spring - deflect & pull housing upwards - this reveals the front of the pump - perhaps there some unpleasant surprises. I can guide you to replace the flowrate

mesh as you do when you clean the filter. There is a plastic pipe, hump arrangement held in place by a wire clamp. Flip clamp off - toward the filter side (use screwdriver if fingers not enough). Pull