Questions & Answers for: wire light switch 2 way

light kit 1 blk, 1 wht wire coming down thru fan to 4-light kit - replacing 2-wire pull chain switch, but (dummy me) removed old b-4 noting how wires were connected - 2-blk wires off switch: if 1 goes

...light lines take the white and strip back the plastic and connect [wire nut] all 3 to the 12/2 white line --now take the 12/2 black line and connect it to the first switch gold color screw- bottom ...

...light to switch 3 by continuing on with new wire black,white, ground. Please help, I am stumped! remove white switch one and connect to incoming white ground--all whites should be connected [hooked] ...

light or do i have to actually wire the 14/3 between switches first. with a single light the 14/3 goes from switch to light but does same apply for multiple lights. also can this be done with recessed

light switch and noticed that 2 wires were loose, all the wires seem to be the same colour, 2 brown and 4 grey with the inner wire being brown. Where the wires are supposed to be connected ie. the top

...light on at both ends of a hall or off is power to one switch ,three wire between switch switch leg from other switch , make up is tie neutrals together grounds together leaving a black and red from ...

...wire connects to dark screw. Repeat identical test for other 3-way switch. At this point your 3-way switches will work, if light bubs are not burned out. 5) Last step, the 4 way switch. Remember from ...

...wire them and the lights come on but not correctly Seems that the both sides come on off 1 switch Can you please explain how they should be wired, so each switch works individually If there are ...

...light on 2nd pull = 2 lights on 3rd pull = 3 lights on. Westinghouse 4-wire fan switch. ...

...light#1 box.Check each wire for signs of high heat and burning. Check each wire if the insulation has been sliced, or cut short, or if copper is visible because wire nut does not cover wires ...