...problem he tried using the same wire from the original horns when he kind of grounded the horn so it would not work / but there is only one wire per horn/ Please rate my response/ Thank you very ...
...lies it that wire. first thing would be to check the horn itself run a wire from the battery to the where the wire connects to the horn if the horn beeps you may have to dig deeper into the horn ...
...wire to the horn, and the horn is mounted to metal, or something that is ground you won't need the other wire connected. Try the horn to see if it works. If not, you'll need to connect that wire to ...
...wire the horn button into your vehicle, and most likely a few wire connectors, and that can all be figured out once you actually see the Horn Button that you purchase. To install the Horn Button: ...
...wire at horn . Should a horn sound if connected to a 6 volt battery to test horn? Does the horn have 2 wires or 1? Newer Yamahas have 2 wires....power to the horn, and then a ground wwire that goes ...
...horn feed wire, at the horn using a test light with the ignition on put 1end of the lite into the black wire and the other to the frame or engine, the lite should then light confirming you have power ...
Question about Model 370 Black Metal Extra Loud Beep Beep Horn - 12 Volt
...by passing your original horn, disconnect the terminals going to it and place the new horn's wires in the horn terminal area. If the wires are color coded, red is for 12V black is for ground. ...
Question about 1996 SL
...horn wire that is common with the horn bracket. Or, connected to a black horn wire if both horn wires are isolated from the bracket. Connect the auto switch wire (the one that reads 12 vdc when the ...
Question about 2000 VehiCROSS
...wire in air horn because horn still sounds even though it has no wire connected to it. Hi Christian: Many vehicles have 2 horns so that the sound is more pleasant. If there is no wire connected to a ...
Question about 2000 VehiCROSS
...The wire to the horn and a hot wire have probably lost the outer insulation and crossed each other causing the horn to start honking when it is connected. Check the wires with an electrical
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
