Questions & Answers for: wire fog lights low beams

fog lights should not work with high beam... they should work with the low beams. they are connected wrong, which probably drew too much current through the light switch burning out the contact points

...wire from the back of your high beams straight to your fog lights then earth the fog lights stright to the car. this will work just make shure you disconnect your battery before playing with the ...

fog lamp / driving lamp hookup. Keep in mind that in most states, for these lamps to be 'legal' (and thus pass inspection), you must wire them such that: 1. You can cut them off (in other words, there

fog lights) work ok. if they do it's in the wiring. turn on your low beams and that's the wires that you need. just find the one that sends 12volts to the low beams and hook it up to red on HID's then

fog lights for the power into the fuse box, but they stay on all the time when I turn on the car. I have them wired into my low beams, but I only want them to come on when I turn on my low beams.. Any

wire for either the High Beams or Fog Lights. Low beams are fine. Fuses are good and these are new bulbs. Inside console indicator lights also do not illuminate for either the High Beams or Fog Lights

wire for either the High Beams or Fog Lights. Low beams are fine. Fuses are good and these are new bulbs. Inside console indicator lights also do not illuminate for either the High Beams or Fog Lights

...fog lights when the high beams are on. Back up lights are turned on by a switch that is activated when the vehicle is put into reverse. Switch could be around shift lever or on transmission linkage. ...

...wire as fog light have only one beam you can use the low beam wire and parallel wire it to the fog lights that way you have the head lights still and the fog lights as accessories correctly wired ...

...fog lights that just stopped working high beam and fog lifts not working checked fuses and relays all of them are fine ?. Disconnect one of your headlamps and use a multimeter to figure out the ...