Questions & Answers for: wire cord

Ad

Question about Replacement Cutters As Seen on TV

1 Answer

wire cord with a 3 wire cord. You can use a 3 wire cord with a machine that came with a 2 wire cord, just cut off the green wire at the machine end. Your wire colors should be white, black, and green.

Ad

Question about Pro Magnum 605989 Kitchen Hood

1 Answer

...wire cord that matches the outlet. My dryer has a 3 wire cord. I removed the cord and want to install the 4-wire cord to my dryer. My question is which wires are hot and which ones are grounds on the ...

Ad

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

cord wire. Use some electrical tape and wrap the nuts to the wires a couple of times so they won't loosen. Make sure you route the power cord around the posts as this is the strain relief and prevents

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

3 Answers

...cord wire goes on the center terminal, the left on the left , and the right on the right. Note: There should be a ground strap or wire that runs from the center terminal to the dryer case Here is an ...

Question about Spectra JBP78 Electric Kitchen Range

1 Answer

...wire cord has only been around for a couple years for decades only 3 wire cords were used.It would be perfectly safe to use a 3 wire cord. Just be sure that on the center teminal where the white wire ...

Question about GEW9250 Electric Dryer

1 Answer

...WIRE CORD The 3 wire cord goes just like this see the 2 wires on the outsides of the cord going to the black/red wires .The wire in the middle of the cord goes on the middle terminal on the cord ...

Question about LER4634J Electric Dryer

1 Answer

...WIRE CORD The 3 wire cord goes just like this see the 2 wires on the outsides of the cord going to the black/red wires .The wire in the middle of the cord goes on the middle terminal on the cord ...

Question about LER4634J Electric Dryer

1 Answer

...WIRE CORD The 3 wire cord goes just like this see the 2 wires on the outsides of the cord going to the black/red wires .The wire in the middle of the cord goes on the middle terminal on the cord ...

Question about LER4634J Electric Dryer

3 Answers

...cord with wire strippers. This exposes the individually wrapped wires inside. Remove the insulation around the individual wires as well. 10.Shape the new wires into small hooks using the needle nose ...

Question about LER4634J Electric Dryer

1 Answer

...wire within the cord. You may use an ohm meter to verify that both wires have a low resistance again (less than 1 ohm). 7) Route the cord back into the "strain-relief" notches in the cord-holder. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heavy Machinery Experts

Brad Brown

Level 3 Expert

18067 Answers

Non profit

Level 3 Expert

25535 Answers

ray gallant
ray gallant

Level 3 Expert

63596 Answers

Are you a Heavy Machinery Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...