...top and bottom screw from the ballast. the ballast should come off. cut the wires closer to the ballast, so that you can identify the wire with the new ballast, which will have the same color
Question about GDM-12 Refrigerator Commercial
...and has a few wires protruding from each end. To replace simply dismount the bad ballast and clip the wires. Match the ballast to a new one, reattach the wires using wire nuts, and remount
...wire nut' the new ballast wires to the old wires. Use flash light or portable emergency light. Talking about replacing the ballast. If it is a regular ballast flourescent fixture, cut the two wire ...
...wire connects to ballast Dimmed Hot Dimmer red wire connects to ballast Hot Dimmer white wire connects to ballast Neutral Those are your wires going to ballast. As you can see, you need 3 wires going ...
Question about Cooper Wiring 2504W Fluorescent Lampholder, Plunger, Push Wire Cap Screw Sw
...wire ballast to a ballast with a black and white wire,2 reds and two blues.I have a 2 tube 18 inch fluorescent lamp with 2 ballasts in it.Each ballast has 2 wires coming out of it.They gave me a ...
Question about Cooper Wiring 2504W Fluorescent Lampholder, Plunger, Push Wire Cap Screw Sw
...system. I am changing the ballast. The existing wiring has blue / red / yellow / black & white wires. I have a new ballast (yes I confirmed at the store it is the correct one) but it does not ...
Question about Cooper Wiring 2504W Fluorescent Lampholder, Plunger, Push Wire Cap Screw Sw
...wire from the ballast). i know the red wire from the ballast goes to one side of the tombstones first you need to know that the ballast is 277 volts or you will fry it, 120 volt ballast will not work ...
Question about Cooper Wiring 2504W Fluorescent Lampholder, Plunger, Push Wire Cap Screw Sw
changing 7 wire ballast to 6 wire ballast i have 7 wire ballast for 2 x36w lamps new ballast has 6 wire its got to be the wrong one--wrong ballast.
Question about Cooper Wiring 2504W Fluorescent Lampholder, Plunger, Push Wire Cap Screw Sw
...ballast to the wire from the tomb stone socket. DO NOT TRY TO take the wire out from tomb stone lampholder. Below link is for your reference. ...
Question about Cooper Wiring 2504W Fluorescent Lampholder, Plunger, Push Wire Cap Screw Sw
...for Magnetek hps ballast cat.no.12310-153 All the ballasts I've ever wired have the wiring diagram on the ballast. I can't find one specific to the Magnetek. Here's a video - how to wire ballast ...
Usually answered in minutes!
3,171 Questions
1,894 Questions
1,239 Questions
1,098 Questions
927 Questions