Question about 2001 Bonneville
wipers work when turned on, but stop in the vertical position when shut off instead of going to the horizontial "at rest position' like they should. Is it in the wiper motor or the switch itself? the
...wipers park in the up position when turned off instead of going to the down position. Is it most likely the multi-functiion switch or the motor This is a common problem with Chevy Venture, Olds ...
...in slower speed. It keeps wiping in Off-position as well. Must turn engine off and back on to stop wiper and have the blades retact to its resting position. you need to replace multi function ...
...wipers still work but are stuck in up position.. any suggestions? yes the wiper motor/module is bad,thats what keeps all the info on how to operate and where to stop ,, replace the wiper motor and ...
2001 pontiac grand prix- wiper blades stop in 2001 pontiac grand prix- wiper blades stop in wrong position when you turn them off. needs wiper module. check bushings around wiper motor at the firewall
...wipers stop in wrong position how do i get to the wiper moter no need to get to the motor, you need to loosen the bolt that holds the wiper, make sure the wiper is set to off after you loosen the ...
...wipers stop in wrong position how do i get to the wiper moter You wont need to, all you need to do is un screw the nut that holds the wiper blades, adjust to the desired position and re tighten. Easy ...
Question about 2001 Grand Prix
...wipers will not park correctly.They go down,but then come up to a straight up position when I turn them off. What is the cause of this?? ok you switch may be faulty or check to see if any leaves or ...
Question about 2001 Grand Prix
wipers stop in vertical position instead of horizontal. What do I need to replace or repair? I tried repositioning the arms but that didn't work. The will position correctly on intermittent but when I
usually, several inches up from its normal stop position. Try to open the wiper motor gear section only, maybe the wiper parking contacts need a little cleaning. Check also for possible cracks on gear
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
