Questions & Answers for: wiper motor runs wipers don

...motor works but the wiper arm does not. I removed the wiper arm cap and found that the bushing that attaches to the motor spindle is cracked. The whole wiper arm assembly will most likely need to be ...

...wiper motor running, the arms are locked up (can't move them manually), and my fuses all seem to be good. I had this problem last year and replaced the wiper motor. Are there other things that can be ...

...wiper motor was running. The wiper motor still seams to run but the wiper don`t move unless I push them with my hand. I think the part that attaches to the motor shaft has been striped . Can this be ...

the wiper motor works but the wipers don't move unless you physicaly move them It would appear the gears inside the wiper motor itself have worn out. A new/different wiper motor will be required.

...motor running check  the nuts on the wiper arms and make sure they are tight.  If the nuts are tight then a linkage on the wiper transmission probably came loose or broke.  You'll ...

windshield wiper doesn't work windshield wiper doesn't work If both wipers don't move, could be the switch or the wiper motor.

...wiper arms move, the linkage between them probably is OK. What isn't OK is the connection between the arms and the motor. You will have to get access to the motor area to find out what needs ...

...all. Checked again about 3 hours later. Motor is running but wipers are still not moving. -Possibly Lock pin or the bolt that hole the wiper arm to the motor shaft is too lose or strip. Good Luck ...

...wiper doesn't work, motor runs Are you sure the motor it turning and not bound up and humming . Its a 2010 so the pivets that control the arms shouldn't be worn out . Their are axess panals on the ...

...wiper motor and the wiper transmission. In rear wiper systems with a single wiper, there’s a single moving part, the wiper motor. If you hear a buzz, it could be a motor straining to move a jammed ...