Questions & Answers for: Dodge wiper arms

driver side wiper arm moves only a little Last night, in the snow and ice, the passenger side wiper arm got caught on the drivers side. It tore appart the passenger blade, but appears to have stripped

...wiper arms. 3. Remove the cowl cover (from chapter 11) 3a. Remove the wiper arms then remove the screws that hold the lower area of the cowl cover to the wiper module. 3b. Disengage the quarter turn ...

Wiper arm behind wiper motor disconnected from motor I have a 1994 Dodge Caravan SE (3.3L V6). The arm that connects the wiper blades to the wiper motor (it sits behind the wiper motor) has ...

...wiper arms on a dodge grand caravan There are no adjustments on the wipers. The arms come off to realign. Pop the wiper arm cap off with a very small flathead screwdriver theres a liitle opening slot ...

...arms. The rear arm seems to be a J hook but I can't get the wiper assembly off. Is there an unlock mechanism of some kind? Lift wiper arm from rear window. then release latch that holds the blade to ...

...wiper arms right..... info on how to do this?? pull the wiper arms off. turn the wipers on intermittent so they work once. then put the wiper arms back on in the down position and tighten bolts on ...

...wiper arms. it will not stop at zero. it over travels down into the cowling. I try to rest them higher then they stop some where in the middle of the windshield Try to run the motor without the wiper ...

driver side wiper dont work vehicle may have a stripped wiper arm.( remove wiper arm,turn on wipers & see if splined knob is moving ),if so turn off wipers & replace wiper arm.or if knob does ...

rear windshield wiper does not cover the intended area how to remove rear windshield wiper arm IF YOU HAVE A PLASTIC CAP ON ARM REMOVE IT AND THE NUT UNDER IT, AND LIFT WIPER ARM OFF. i think on the ...

...wiper arms on 1997 ram 3500 van with arms that accept HOOK TYPE replacement blades? Also, which wiper arm/s can be mounted to existing wiper motor? The existing wiper arms require replacement blades ...