Questions & Answers for: wiper arms

Ad

Question about 1999 Town Car

1 Answer

...wiper pivot arms (17527). Remove the nuts (one each side). Remove the windshield wiper pivot arms. Remove the LH and RH cowl top vent panels. Remove the hood weatherstrip. Remove the screws. Remove ...

Ad

wiper arms may not park in the correct location. NOTE Use a suitable tool to separate the wiper linkage arm from the wiper mounting arm and pivot shaft assembly. Remove the 3 bolts and the wiper motor

Ad

...wiper arms. it will not stop at zero. it over travels down into the cowling. I try to rest them higher then they stop some where in the middle of the windshield Try to run the motor without the wiper ...

Question about 1997 Blazer

1 Answer

wiper arms were not mounted at the right spot, it could have damaged the motor as it returned to the rest position, unfortunately. If there is noise, the noise could be coming from the wiper arm joint

Question about 1997 Blazer

1 Answer

I need to adjust the wiper arm on a 1997 suburban, it hits the side of the window. Wiper Arm & Blade (Front) Removal & Installation Wiper Blade To Remove: Turn ignition switch to ACCY position

...wiper arms Remove the air inlet grille panel. Disconnect the connectors from the wiper motor assembly. Remove the three screws and the wiper drive system module. Using GM special tool J 39232 or ...

Question about 1998 Corvette

2 Answers

...wiper arms are now in their parked position, although may not be properly aligned. 2. Access the bottom of the compromised wiper blade arm. You may have to open the hood or remove the wiper arm ...

Question about 2000 L-Series

4 Answers

...wiper arms? pull the wiper arm up, pull the wiper back then pull it hard down the wiper arm once the loop releases the wiper. SOME PULL OFF SOME YOU SCREW OFF THERE A SMALL NUT THATS YOU CAN SEE AND ...

how to take off the rear windsheild wiper on a 94 grand cherokee You will need a 13-inch wiper blade for the rear window. 1 - When removing the wiper blade lift the wiper arm away from the window. ---

...wiper arms are in the innerwipe position and not moving.    Disconnect the washer hose from the washer nozzle.    Remove the cover from the wiper arm ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22434 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...