Questions & Answers for: Volvo wiper arm

Question about 2002 S40

2 Answers

...the wiper arm moves when you turn on wippers. If so, it is a simple compression joint....put the arm back on the post and tighten, replace round cap and plastic cover, close hood and check wiper ...

Ad

...wiper "arm"? Possible that the spring in it has become weak, making it not fully press the wiper blade against windshield. I have 95 and 97 '850s and both of them have the drivers-side wiper problem. ...

Ad

...wiper arm ,put a blanket on teh screen to prevent accidents and i have the T shirt so do it and no arguments .now pull the blade horizontal with the arm and put finger under hook shaped bend on the ...

...wiper arm gets to point where blade does not touch screen, turn off ignition switch so that wipers do not return to park position. It may take a few goes to stop arm in the right position so repeat ...

...wiper arm, where it connects to the vehicle. usually all thats wrong, is the nut which attaches the arm to the stem on the wiper transmission, has come loose. this usually happens when the wipers are ...

Question about 1990 240

2 Answers

...wiper arm down,or towards windsheild. does it move then? do you see the wiper gear moving at all? wiggle the arm,does it move on it's own? if so, you need the wipers adjusted.[autozone,advance auto ...

...wiper arm off the windscreen as you would do if you were washing the windscreen. tilt the blade assembly so that they are at right angle to the wiper arm and now push the wiper blade down towards the ...

wiper arm the arm sits high on the windshield and therefore slaps the trim surrounding the windshield when the wipers are in operation your best bet would be to put shorter wiper blades on car, if the

...wiper arm is working. What's left? The linkage to the other arm, and the connection of the arm to the pivot shaft assembly. Let's find out:1. Remove the inoperative wiper arm. You will expose the ...

...wiper arm are stripped, so you could probably lift the cover and snug the nut a bit to make it work again. If the splines are completely gone (usually in the arm) you can replace the arm with a junk ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Volvo S70
1998 Volvo S70

664 Questions

2000 Volvo S40
2000 Volvo S40

682 Questions

2000 Volvo S80
2000 Volvo S80

587 Questions

1999 Volvo S80
1999 Volvo S80

551 Questions

1996 Volvo 850
1996 Volvo 850

468 Questions

Top Volvo Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...