Questions & Answers for: windstar belt tensioner

...Windstar 3.8 L Belt worn out, ripped apart, bought new belt. Need to loosen off the belt tenioner pulley to put on new belt. Need to tighten belt. there is a tensioner that normally holds the belt in ...

I need to know how to release the tension on a serpentine belt on a 2003 Ford Windstar. move the tensioner with the special tool away from the belt and then slide the belt from under the tensioner

...Let me know if this helped, or if you have additional information questions. Feel Free to contact me at

...belt 2000 windstar 3.8 Windstars can be difficult because they are so cramped in front. You can rent a serpentine belt tool from a parts store such as autozone. Find the tensioner and use the tool to ...

...belt on a 2001 ford windstar Hi Water271, I think you are looking for the location of the belt tensioner. Here are pictures of the routing and the tensioner position on both engines available on the ...

...windstar? To check belt tensioner first remove the drivebelt. Then spin the pulley and listen for noise. Excessive noise from the pulley indicates a dry or faulty bearing which should be replaced.,To ...

...Windstar. I cannot figure out how to release the tension on the belt. Where is the tensioner? Usually there is a spring loaded, ilder bearing that is located near center of belt routing. Put a wrench ...

...windstar 1998 3.8 l 1. Place a wrenchon the tensiorer pulley bolt and rotate the tensioner body until tenion on the belt is relieved. 2. Remove the belt from the auxiliary components and carefully ...

...belt. I replaced the alternator on a 01 windstar w/ a 3.8 V6 and need to know how to find and loosen the tensioner For 2001 Ford Truck Windstar 3.8L SFI 6cyl Fig. Accessory serpentine belt ...

...windstar serpintine belt will not move at all 2002 Windstar has a 3.8 litre engine, on this engine there is an automatic belt tensioner. The tensioner pulley is a the small one under the power ...